Specifications - Makita BUH550 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blade length
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Do not expose to rain.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BUH550,UH550D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB(A)
Model BUH650,UH650D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB(A)
-1
)
END013-2
ENE014-1
ENG905-1
) : 85.1 dB(A)
pA
) : 93.1 dB(A)
WA
) : 84.3 dB(A)
pA
) : 92.3 dB(A)
WA
BUH550 UH550D
550 mm
1,000 - 1,800
1,070 mm 1,074 mm
5.1 kg
D.C.36V
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BUH550,UH550D
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BUH650,UH650D
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
BUH650
650 mm
1,000 - 1,800
1,150 mm
5.2 kg
D.C.36V
Wear ear protection
2
) : 2.5 m/s
h
2
2
) : 3.0 m/s
h
2
UH650D
1,154 mm
ENG900-1
ENG901-1