Canon DC100 Instruction Manual page 69

Playing Back the Disc in an External DVD Device
External DVD device refers to DVD players, DVD recorders, computer's DVD drives and
other digital devices.
Problem Solution
OJ
There is a brief stop between Depending on the DVD player, there might be a very short
-
scenes. stop between scenes during playback.
Disc is running, but image will TV/VIDEO selector on the TV is not set to VIDEO. Set the 64
not appear on the TV screen. selector to VIDEO.
You attempted to play back or dub an incompatible disc. Stop
-
playback/dubbing.
The disc cannot be The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 72
recognized by the device. Or,
The disc has not been finalized. 61
even though the disc is read,
DVD-RW discs in VR mode can only be played back with VR
-
cannot play back the disc or
the picture is distorted.
mode-compatible DVD players. Refer to the instruction
manual of your DVD device.
Cannot edit my recordings or
It may not be possible to edit or add recordings with an
-
add recordings to the disc
external DVD recorder on a disc recorded with this camcorder.
with the DVD device.
When writing on a disc in this
The camcorder has exceeded its operational temperature. -
camcorder recordings Disconnect the compact power adapter and remove the
transferred from a computer,
battery pack and let the camcorder cool down before resuming
an error message appears. use.
Message Explanation OJ
SET THE TIME lONE, You have not set the time zone, date and time. This message 20
DATE AND TIME appears each time you turn the power on until you set the time
zone, date and time.
CHANGE THE BATTERY Battery pack is exhausted. Replace or charge the battery pack.
17
PACK
TEMPERATURE TOO The camcorder has exceeded its operational temperature.
-
HIGH CANNOT RECORD Disconnect the compact power adapter and remove the battery
TEMPERATURE TOO
and let the camcorder cool down before resuming use.
HIGH CANNOT REMOVE
DISC
CANNOT RECORD There is a problem with the disc. Replace the disc.
22
CHECK THE DISC
This message can also appear if condensation has formed. Wait 73
until the camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched.
-
REACHED THE The maximum number of scenes has been reached. Delete some 22
MAXIMUM NUMBER OF recordings (DVD-RW in VR mode) to free some space or replace
55
SCENES the disc.
CANNOT PLAY DISC The disc is dirty or you attempted to play back a disc type not
-
supported (not DVD-R/RW).
This message can also appear if condensation has formed. Wait
73
until the camcorder dries completely before resuming use.
CANNOT EDIT DISC There are no scenes to edit or the recording is damaged.
-
This message can also appear if condensation has formed. Wait
73
until the camcorder dries completely before resuming use.
-
69