Selecting The Recording Data Display - Canon DC100 Instruction Manual

Selecting the Recording Data Display
The camcorder keeps a data code containing the recording date and time and other
camera data such as shutter speed and exposure (f-stop).
I
To change the operating mode, refer to About the Operating Modes (iI1 11).
CPI.:A¥~Oi)
:
[DATE], [TIME], [DATE&TIME] only.
You can select the data code display style on the screen.
MENU
(lIl33)
Options
~
DISPLAY SETUP
H
DATA CODE
IEeJ DATE & TIME
I
[llifl DATE] Displays the date or time when the scene or still image was
-[-e-T-I-M-E-]- - - - - - ; recorded.
[ffi!'e DATE &
TIME]
Displays both the date and time of the recording.
[Ilil CAMERA DATA] Displays the exposure (f-stop) and shutter speed used when
recording the image.
[ffi!'e'IilCAM.& D/T]
Displays the exposure, shutter speed, date and time of the
recording.
32
Selecting the Data Code
1. Press
2. Select
(~
.. ) [DISPLAY SETUP] and press (§).
3. Select
(~
.. ) [DATA CODE] and press (§).
4. Select
(~
.. ) the desired option and press (§).
5. Press to close the menu.
Turning the On-screen Displays On/Off
During playback, repeatedly press (.. ) to turn the
on-screen displays on/off in the following sequence:
Allan-screen displays + data code display on
•
•
Only the data code display on
•
•
All on-screen displays off
~i-'?fD/SP~}-