Installing The Windows 2000 Driver - Linksys BEFSR41 User Manual

Installing the Windows 2000 Driver

1. With the Router connected to your PC's USB port using a USB cable, start
up your PC in Windows 2000 and insert your driver disk. Windows will
show a message notifying you that the PC has found new hardware.
Windows' Hardware Wizard will show a message to notify you that it is
ready to start installing the driver files to your PC. Click the Next button.
2. Select Search for a suitable driver for my device (Recommended) and
click the Next button.
26
Instant Broadband
Figure 6-9
Figure 6-10
Series
™ EtherFast
3. Insert the driver disk into the floppy drive, and when Windows asks you
where to search for driver files, select Floppy disk drives only. Click the
Next button.
4. Windows will show a message notifying you that it has found the driver files.
Click the Next button.
®
Cable/DSL Routers
Figure 6-11
Figure 6-12
27