7. Windows will notify you that it has completed copying the driver files to
your PC. Click the Finish button to complete the USB driver installation.
8. Windows will ask you if you want to restart your PC. Click the Yes button
so your new installation will take effect.
If it does not ask you to restart your computer, click the Start button, and
select Shut Down. Then select Restart and click the Yes button.
24
Instant Broadband
Figure 6-6
Figure 6-7
Series
™
EtherFast
9. When your PC is finished restarting, click the Start button, and select
Settings, Control Panel, and Network. Make sure that TCP/IP is installed
for your PC as shown on the screen in Figure 6-8. By default, Windows 98
has TCP/IP installed. If TCP/IP is not installed, please go to "Appendix D:
Installing the TCP/IP Protocol" for instructions on installation.
Go to "Chapter 7: Configuring Your Network with the Cable/DSL Router."
®
Cable/DSL Routers
Figure 6-8
Your USB installation is now complete.
25