Install Pin Through Front Lift Assembly; Reconnect Lift Links; Install Idler Locating Rod; Assemble Lift Handle To The Snow Thrower - Craftsman 842.242560 Owner's Manual

ASSEMBLY
(
INSTALL PIN THROUGH FRONT LIFT
ASSEMBLY
INSTALL IDLER LOCATING ROD
• OPERATOR'S POSITION
FIG. 19
V-BELT SMALL HAIR
ENGINE PULLEY COTTER PIN
FIG. 18
IDLER LOCATING ROD
• Slide Lift Handle over the end of the lift Bar with
the offset toward the operators position of the
tractor. (See Fig. 1 9 ) ' >
ASSEMBLE LIFT HANDLE TO THE SNOW
THROWER
• Slide idler locating rod to the left and insert end of
idler locating rod into bottom hole in tractor frame.
(See Fig. 18)
• Secure idler locating n;>d to tractor with small hair
cotter pin
INSTALL V-BELT TO TRACTOR
FIG. 17
FRONT LIFT
ASSEMBLY
• Install control rod anchor of lift link rod into each
side of front lift assembly and secure with small
hair cotter pins. (See Fig. 17)
RECONNECT LIFT LINKS
• Roll V-belt around engine pulley from right side to
left side. (See Fig. 18)
16
• Move Snow Thrower Lift Handle forward to lowered
position.
• Turn front wheel of tractor to left as far as they will
turn. (See Fig. 17)
• Align tube of front lift assembly with holes in tractor
Attachment plates and insert pin through plate
holes and tube.
• Secure pin with large hair cotter pin at each end.
• Straighten tractor wheels to front.