Remove The Mower; Assemble Left Rear Hanger To Tractor Frame; Assemble Right Rear Hanger To Tractor Frame - Craftsman 842.242560 Owner's Manual

ASSEMBLY
- - - - - - - - - - - - - - - - - - - - - - - (
REMOVE THE MOWER ASSEMBLE RIGHT REAR HANGER TO
TRACTOR FRAME
• Before installing your Snow Thrower, you must
remove your Mower from the Tractor.
• See your Tractor Owner's Manual for proper
procedures for removing the mower.
• The Rear Suspension Arms may remain with the
tractor.
• Store seven retainer springs and two front links
with the mower.
• Remove two bolts from tractor frame at right side.
(See Fig 3)
• Install Right Rear Hanger to side of tractor frame
with hanger clevis toward the inside.
• Secure Right Rear Hanger with two 3/8 x 3/4 hex
bolts, one flat washer, and two lock washers.
ASSEMBLE LEFT REAR HANGER TO
TRACTOR FRAME
RH REAR MOUNTING
BRACKET (
FLAT
WASHER\ '"
I I \ \ \ \
FIG. 3
3/8 X 3/4 HEX BOLT
lOCK WASHER 3/8 X 3/4 HEX BOLT
_
~LOCK
WASHER
'0 0
E
lH REAR MOUNTING
BRACKET
LOCK WASHERS
3/8 X 1 HEX BOLT
..J
FLAT
I
~
WASHER
TRACTOR
FRAME
Remove two bolts from tractor frame at left side.
(See Fig. 2)
Install Left Rear Hanger to side of tractor frame
with hanger clevis toward the inside.
Secure Left Rear Hanger with one 3/8 x 1 hex bolt,
one flat washer, and one lock washer, and one 3/8 x
3/4 hex bolt with one lock washer.
•
•
•
FIG. 2
10