Trunk Verification From Station - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
4. When connected to the party,
press the CONF/TRNS key to
join the held party and form a
three-way conference.
To Verify the Status of a Trunk:
1. Access an idle line.
2. Enter the Trunk Verification
from Station access code.
3. Enter the equipment number
of the trunk that you wish to
verify.
If the called party answers, you can alternate between this party and the
held party by repeatedly pressing the Swap access key (see
Consultation Hold).
If there are no conference circuits currently available, you will hear
reorder tone. If this occurs, press the RLS key to reconnect to the held
party.
The conference will be maintained until one or both of the parties hang(s)
up. When one party disconnects, you will be connected to the remaining
party.
At any point during the conference, you can drop the last-added party by
pressing the RLS key.
NOTES:
1. A call to an attendant cannot be placed on hold.
2. You cannot use more than one line appearance key to form a three-
way conference.
3. If you hang up at any point during the conference, the held call will
immediately recall your station.

TRUNK VERIFICATION FROM STATION

The status of a specific trunk can be verified by simply entering a feature
access code and the equipment number of the trunk. Trunk Verification
from Station is especially convenient for system administrators or
maintenance personnel who need to verify trunk activity. The
PERCEPTION 4000 system indicates each trunk's busy or idle status by
providing busy or dial tone and trunk status displays.
PERCEPTION 4000 HDT2020SD telephones will display "ENTER EQN."
If the trunk is idle, you will hear dial tone. If the trunk is busy, you will
hear busy tone. HDT2020SD telephones will also display the busy or idle
status of the verified trunk.
If the verified trunk is idle, the trunk can be used for outgoing call
placement.
FEATURE OPERATION
4-55