Cisco Unified Ip Phone Mac Address Determination - Cisco 6901 Administration Manual

Unified ip phone and telephony networks

Hide thumbs Also See for 6901:

Table of Contents

Deploy Phone in SCCP and SIP Environment

To deploy Cisco Unified IP Phones in an environment that includes SCCP and SIP and in which the Cisco

Unified Communications Manager autoregistration parameter specifies SCCP, perform these general steps:

Procedure

Step 1

Set the Cisco Unified Communications Manager auto_registration_protocol parameter to SCCP.

Step 2

From Cisco Unified Communications Manager, choose System > Enterprise Parameters.

Step 3

Install the phones.

Step 4

Change the Auto Registration Protocol enterprise parameter to SIP.

Step 5

Autoregister the SIP phones.

Cisco Unified IP Phone MAC Address Determination

Several procedures described in this manual require you to determine the MAC address of a Cisco Unified

IP Phone. You can determine the MAC address of a phone in these ways:

• Look at the MAC label on the back of the phone.

• Display the web page for the phone and click the Device Information hyperlink.

Table of Contents

6911