Security Setup
Setting Passwords
Document 800-01794 Rev C
05/09
Figure 1-18
Security Screen
Use the security screen to set up the following passwords:
•
When general password protection is enabled, users (up to 2) must enter the
general password to view camera images.
•
When management password protection is enabled, the management user (limited
to one) must enter the management password to modify the default camera
settings.
The default user names are:
•
The default username for the General password is root.
•
The default username for the Management password is system. Honeywell
recommends that you change this password when setting up a new camera.
HCX Series Network IP Camera Operator Guide
33