3.
Basic Operation
Taking a Still picture
•
Set the drive mode dial to [
1
Select the Recording Mode.
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
•
Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
Focus
Focus indication C
AF area D
Sound
•
The focus indication is displayed as [
longer than usual.
•
When the Focus Mode is set to [AFF] or [AFC].
–
A beep will be emitted when focus is first achieved during the pressing halfway.
–
If AF Mode is set to [Custom Multi], such as [
moment only when focus is achieved for the first time by pressing the shutter button halfway .
3
Press the shutter button fully (push it in further), and take
the picture.
] (single recording).
(P62)
When the subject is
focused
On
Green
Beeps 2 times
] in a dark environment, and focusing may take
LOW
] or [
59
D
2.8
2.8
2.8
60 60 60
A
B
When the subject is not
focused
Blinks
—
Beeps 4 times
], the AF area is displayed for a
C