14.
Others
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
•
Perform formatting
•
Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Depending on the [Rec Format] and [Rec Quality] of a motion picture, the speed class rating
required for the card differs. Use a card that meets the rating. For details, refer to
motion picture recording and speed class
•
If the recording stops even when you are using a card that meets the speed class rating, the
data writing speed is too slow. We recommend making a backup and then format the card
(P31).
Depending on the type of the card, motion picture recording may stop in the middle.
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
Format the card on this unit after saving necessary data on a PC etc.
If you execute [No.Reset] in the [Setup] menu after formatting, the folder number is reset to
100.
(P54)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect.
•
This message also appears when the USB connection cable is connected to the camera only.
If the other end of the USB connection cable is connected to a PC or printer, the message will
disappear. (P310,
313)
[Editing operation cannot proceed as information processing is ongoing.]
When there are too many image files, the currently retrieving information icon ([
or [
]) may be displayed on the playback screen for a long period of time. During
this time, use of some items in the [Playback] menu is not possible.
–
If this unit is turned off while acquiring information, only the pictures that have already
acquired the information are saved as a group.
When you turn on again, the information retrieval will restart from the same point.
(P31)
on this unit after saving necessary data on a PC, etc.
"
on P30.
331
"
About the
(P31)
(P52)
]