Advertisement
How to charge
1 The charger is HONDA special one, 110v AC.
2
Firstly, open the charging input socket, plug
the connector of adapterarger into the
charging socket. On the other side, plug the
power adapter into electric source. Be sure
turn off the power switch when charging
without remove battery pack from bike.
3 when charging ,the charger indicator light as
below
Power on
power light green, charging light green.
Charging
power light green, charging light red.
Finish
power light green, charging light red off.
Charger
power light green, charging light red,
problems
shining frequently.
Battery
power light green, charging light red,
problems
shining slowly.
Ways of remove/install battery case
Remove: Put the seat up, turn
the key to "battery case open"
position and remove the battery
case.
Install: Put battery box in the
position, turn seat down and
lock, then, turn back key in
power off position.
Caution：
Please make sure the
battery like right
picture after remove
from bike. Don't lie flat
to avoid electrolyte
outflow.
The Method Of Using Bicycle
How to install battery
following steps to install battery
A: install "+" terminal (red wire), then install "-" terminal (green wire)
1、Please charge in dry and ventilated
indoor condition. If in wet and/or damp
condition, it might lead to destory
charger and cause fire.
2、Please don't cover anything on charger
when charge, it will cause over heating
or fire.
3、Do not charge close to petrol when
in order to avoid fire.
4、Using other brand charger may damage
battery and/or other risks.
6、Disconnect the plug from power after
charging is finished, otherwise, it may damage
charger.
7、Keep children far away from battery when
charging.
Advertisement
