Wireless Client Wpa Supplicants; Configuring 802.1X And Wpa; Figure 30 Wireless Lan: 802.1X/Wpa; Table 19 Wireless Lan: 802.1X/Wpa - ZyXEL Communications Prestige 660H Series User Manual

802.11g wireless adsl2+ 4-port security gateway
Hide thumbs Also See for Prestige 660H Series:
Table of Contents

Advertisement

Prestige 660H/HW Series User's Guide

7.11 Wireless Client WPA Supplicants

A wireless client supplicant is the software that runs on an operating system instructing the
wireless client how to use WPA. At the time of writing, the most widely available supplicants
are the WPA patch for Windows XP, Funk Software's Odyssey client, and Meetinghouse Data
Communications' AEGIS client.
The Windows XP patch is a free download that adds WPA capability to Windows XP's built-
in "Zero Configuration" wireless client. However, you must run Windows XP to use it.

7.12 Configuring 802.1x and WPA

To change your Prestige's authentication settings, click the Wireless LAN link under
Advanced Setup and then the 802.1x/WPA tab.
you select
.
You see the next screen when you select No Access Allowed or No Authentication
Required in the Wireless Port Control field.

Figure 30 Wireless LAN: 802.1x/WPA

The following table describes the label in this screen.

Table 19 Wireless LAN: 802.1x/WPA

LABEL
Wireless Port
Control
Back
Apply
Cancel
93
DESCRIPTION
To control wireless stations access to the wired network, select a control method from
the drop-down list box. Choose from No Access Allowed, No Authentication
Required and Authentication Required.
No Access Allowed blocks all wireless stations access to the wired network.
No Authentication Required allows all wireless stations access to the wired network
without entering usernames and passwords. This is the default setting.
Authentication Required means that all wireless stations have to enter usernames
and passwords before access to the wired network is allowed.
Select Authentication Required to configure Key Management Protocol and other
related fields.
Click Back to go to the main wireless LAN setup screen.
Click Apply to save your changes back to the Prestige.
Click Cancel to begin configuring this screen afresh.
The screen varies by the key management protocol
Chapter 7 Wireless LAN Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prestige 660hw series

Table of Contents