Front Control Panel - Omega OF902X Installation And Operating Instructions Manual

7. FRONT CONTROL PANEL

All the cooker controls and commands are on the front panel.
OVEN THERMOSTAT KNOB
OVEN FUNCTION KNOB
Before using the oven make sure that the symbol
ELECTRONIC PROGRAMMER".
Standard heating
The circle next to each knob indicates the cooking zone it controls. To heat, turn
the knob to the desired position. Adjustment is continuous so that the appliance
also operates at any intermediate value. To turn off, return the knob to 0
Double heating
The circle next to each knob indicates the cooking zone it
controls. To heat the inner cooking zone, turn the knob to the
desired position.
To heat both the inner and outer cooking zones, turn the
knob to /
return to 9. To adjust heating intensity, rotate the knob
anticlockwise to the desired position 0. To return to heating
of the inner cooking zone only, set the knob back to and then
turn to the desired position. To switch off, return knob to 0.
8
Instructions for the user
COOKING HOB CONTROL KNOB
/ ; and then release. The knob will thus
FRONT LEFT-HAND COOKING ZONE
REAR LEFT-HAND COOKING ZONE
CENTRAL COOKING ZONE
REAR RIGHT-HAND COOKING ZONE
FRONT RIGHT-HAND COOKING ZONE
; appears on the display. See paragraph "9.