Advertisement
Operating Your Cisco 7941/7942/7961/7962 IP Phone
Basic: Place a Call
To place a call, use one of the following methods:
•
Lift the handset and dial the number.
•
Dial the number and then lift the handset.
•
Press a line button, dial the number, and then lift the handset.
•
Press the New Call soft key, dial the number, and then lift the handset.
•
Press a speed dial button and then lift the handset.
•
If you have selected a number from a directory, press the Dial soft key, and then lift the handset.
Speakerphone: Place a Call
To place a call using the speakerphone, use one of the following methods:
•
Press the speakerphone button and perform the steps for placing a basic call, and do not lift the
handset.
•
Perform the steps for placing a basic call and do not lift the handset.
To switch to handset operation, just lift the handset.
Headset: Place a Call
To place a call using a headset, press the heasdset button, then perform the steps for placing a basic call.
Do not lift the handset.
To switch to handset operation, just lift the handset.
Answer a Call
To answer a call, use one of the following methods:
•
Lift the handset.
•
If you are using a headset, press the Headset button. If necessary, press the line button to select
between incoming calls.
•
To use the speakerphone, press the Answer soft key or the Speaker button.
End a Call
To end a call, use one of the following methods:
•
Hang up the handset.
•
If you are using a headset, press the Headset button or the EndCall soft key.
•
If you are using the speakerphone, press the Speaker button or the EndCall soft key.
Redial a Number
To redial the most recently dialed number, use one of the following methods:
•
Lift the handset and press the Redial soft key.
•
Press the Redial soft key to dial using the speakerphone.
Page 2 of 6
11/13/2012
Advertisement
