Turning The Printer On; Using The Operator Panel - Sharp DX-B350P Installation Manual

Turning the Printer On

The printer motors run for 2 or 3 minutes when you first turn the power on.
NOTE:
The printer displays a series of messages and then displays READY when it is available for use.
While turned on, the printer will go into the standby state if it remains idle for a period of time.
NOTE:
When you have finished using the printer for the day or you do not intend to use it for a long
period of time, switch off the power.

Using the Operator Panel

To configure the printer, press the MENU button and use the NEXT, RETURN and
PREVIOUS buttons to navigate through the Operator Panel options and the SELECT button
to choose the option. You can use the CANCEL button to exit any current selection.
RETURN
Installation Manual
LCD Display
STATUS
MENU
NEXT
SELECT
PREVIOUS
Using the Operator Panel
1. Press the power switch to the <I>
position to turn the power on.
FAULT
ACTIVE START/STOP
CANCEL
INFO
Basic Installation
2-9