Installation Procedure
Basic Installation
Connecting an Interface
The following four interfaces are available to directly connect the printer or to connect to a
network.
Serial RS 232 Cable Connection
Ethernet 10/100 Base-Tx Connection
Parallel Cable Connection
Connecting the Power Cord
Connect the printer exclusively to an outlet with a suitable voltage rating and current rating
for your printer's model.
2-8
USB2 Port
1. Connect the power cord to the
2. Make sure that the power switch
power cord connector at the back
of the printer.
has been firmly pushed to the
<O> position and then insert the
other end of the power cord to a
correctly rated power outlet.
Installation Manual