Space Requirements - Sharp DX-B350P Installation Manual

Hide thumbs Also See for DX-B350P:

Table of Contents

Preparing a Location for the Printer

Basic Installation

•

Do not place the printer in a location with poor ventilation, or high level of dust,

otherwise a fire hazard or electric shock may result.

•

Do not place the printer near heaters or similar objects, otherwise a fire hazard may result.

•

Never block the ventilation openings of the printer, otherwise the internal temperature

will build up and cause a fire hazard.

•

Do not place the printer near alcohol, benzine, or other volatile and flammable materials,

or a fire hazard may result.

Space Requirements

A certain amount of space is required for proper operation of the printer and also for performing

printer maintenance and replacing consumables. Use the following figures to plan for

appropriate clearances when determining a location for your printer.

Be sure to leave ample space between the ventilation openings on the printer and the nearest wall or

NOTE:

other surface, otherwise overheating may occur leading to a fire hazard. For easy operation,

maintenance and replacing of consumables, you should also leave the clearances shown below

around the printer. Installation of the printer should be carried out by qualified service personnel.

2-2

200 mm (7-7/8 in)

402 mm (15-53/64) in)

402 mm

255 mm

200 mm

(10-3/64in)

255 mm

300 mm

(11-52/64in)

Installation Manual

Table of Contents

Dx-b450p