Cisco Smart Storage NSS322 Quick Start Manual page 16

-
• File system:
-
-
• Encrypt disk volume:
-
-
If you choose yes, the disk volume is encrypted with a password
and provides an extra layer of security against the theft of data in
the event that disks are stolen. File transfer performance to
encrypted volumes is generally lower than non-encrypted
volumes. The encryption password is the password of the
administrator account.
Click Next. The Finish window displays the server configuration.
S 24
TEP
Click Start Installation. System begins initializing and the
S 25
TEP
configuration progress is displayed.
When the configuration is complete, you are returned to the
Configuring the NAS window in the Setup Wizard.
From the Configuring the NAS window, click Next to continue to
S 26
TEP
Map a Network Drive.
The Map a Network Drive window opens. Continue to
Network Drive, page
System Configuration Using the Mac Setup Wizard
After connecting the equipment and pressing the Power button, the
system takes a few minutes to initialize. Listen for one beep. Wait a minute
until you hear a second beep. The power light will turn solid green. The
NAS device has started successfully and you can configure the device
using the First Time Installation Wizard.
16
RAID 1—Uses two disks (mirrored disks) which each store
the same data, so that data is not lost if one disk fails. Total
capacity of the array equals the capacity of the smaller disk
(default).
EXT4—EXT4 is the successor to EXT3 and provides better
performance because the EXT4 file system can support
very large volumes (default).
EXT3—EXT3 is commonly used in the Linux environment.
EXT3 provides reliability file systems with a maximum
capacity support up to 16 terabytes (TB).
No—Do not encrypt the disk volume (default).
Yes—Encrypt the disk volume using a password.
21.
Cisco Small Business NSS322 Smart Storage
Mapping a