Advertisement
• FIXING TO THE WALL
Drill the holes A respecting the distances indicated (Fig.2).
Fix the appliance to the wall and align it in horizontal position to the wall
units. When the appliance has been adjusted, definitely fix the hood using
the screws A.
For the various installations use screws and screw anchors suited to the type
of wall (e.g. reinforced concrete, plasterboard, etc.). If the screws and screw
anchors are provided with the product check that they are suitable for the
type of wall on which the hood is to be fixed.
• FIXING THE DECORATIVE TELESCOPIC FLUE
Arrange the electrical power supply within the dimensions of the decorative
flue. If your appliance is to be installed in the ducting version or in the
version with external motor, prepare the air exhaust opening. Adjust the
width of the support bracket of the upper flue (Fig.3). Then fix it to the
ceiling using the screws A (Fig.2) in such a way that it is in line with your
hood and respecting the distance from the ceiling indicated in Fig.2. Connect
the flange C to the air exhaust hole using a connection pipe (Fig.4).
To transform the hood from a ducting version into a filtering version, ask
your dealer for the charcoal filters and follow the installation instructions.
• FILTERING VERSION
Install the hood and the two flues as described in the paragraph for
installation of the hood in ducting version. To assemble the filtering flue
refer to the instructions contained in the kit. If the kit is not provided, order it
from your dealer as accessory. The charcoal filters must be fitted in the
ducting unit located inside the hood.
USE AND MAINTENANCE
• It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for
15 minutes after cooking is terminated in order to completely eliminate
cooking vapors and odours.
The proper function of the cooker hood is conditioned by the regularity of
Advertisement
