Table of Contents
Advertisement
You must set the alarm recording mode in the ALARM SET menu before executing alarm
recording.
1
2
3
4
5
When you finish ALARM RECORDING SETUP by following 1~5 steps above, try inputting the
alarm signal. Then recording will start with buzzer. If you set the DURATION to T-END,
recording will be done to the end of the tape. If you set it to 3MIN(or 5 MIN), recording will be
done within the indicated time.
LEVEL setup - The recording continues for 1 min. in case of within 1 min.
English-16
ALARM RECORDING ( CONTINUED )
Press the MENU button to display MENU on the monitor.
Then Select ALARM SET using MOVE button.
Set MODE to ON by pressing the SELECT button.(ON/OFF)
Set Speed(L3H, L15H, L27H)
Set BUZZER(ON/OFF)
Set DURATION(1/3/5 MIN/T-END/LEVEL)
- The recording continues for the time that ALARM IN signal is input in case of
above 1 min.
During alarm recording, the alarm recording mark ('A') will automatically be displayed on
screen.
* The alarm in indicator( ) blinks during alarm recording and on when the alarm recording
is finished.
* When the alarm recording is finished, the VCR resumes recording in the same record
modes as before the alarm recording.
MENU
VCR SET UP
ALARM SET
SEARCH
CLOCK/TIMER
POWER FAIL RECALL
LANGUAGE
[
] [
]
[MENU] EXIT
ALARM SET
MODE
ON
SPEED
L3H
BUZZER
ON
DURATION
1 MIN
ALARM RECALL
[
] [
]
[MENU] EXIT
Advertisement
Table of Contents
