Honeywell HR24TLX Installation Manual page 15

When the REC button is pressed, the recording mode is switched in the order of below table.
•Linear REC mode : L3H, L15H, L27H
During recording, press the PLAY button. The tape will rewind a little and then play the
recording just made. When the tape reaches the position where the REC CHECK button was
pressed, the VCR returns to record mode. While REC CHECK is executed telerecording is not
carried out.
• Apply the specified line input signal to the AUDIO IN connector.
• Available recording hours are shown above.
• For Audio ON/OFF setting, use AUDIO ON/OFF button on the front panel.
• Except for 3H while verifying the audio sound of the recorded tapes the picture quality
When the LOCK is set to on, the control buttons will not operate and the VCR is kept in the
current mode . To release the lock mode, the LOCK is set to off.
English-14
MANUAL RECORDING ( CONTINUED )
PAL
REC/PLAY Actual rec/ Play hours
MODE E-180
L3H 3H
L15H 15H
L27H 27H
48H 51H
72H 75H
120H 123H
168H 171H
240H 243H
480H 483H
960H 963H
cannot be as good as on Audio OFF for the characteristic of linear tape speed.
RECORDING MODE
Recording Interval Number of Rec fields
E-240
4H
20H
36H
68H
100H
164H
228H
320H
644H
1284H
RECORDING CHECK FUNCTION
AUDIO RECORDING
AUDIO PLAYBACK
REC LOCK MODE
0.02s/f 50 f/s
0.1 s/f 10 f/s
0.18 s/f 5.56 f/s
0.34 s/f 2.94 f/s
0.5 s/f 2 f/s
0.82 s/f 1.22 f/s
1.14 s/f 0.88 f/s
1.62 s/f 0.62 f/s
3.22 s/f 0.31 f/s
6.42 s/f 0.16 f/s
Audio
recording
yes
yes
yes
no
no
no
no
no
no
no