Sharp UX-510A Service Manual page 8

UX-510ATH
FO-1470TH
3. Assembly and connections
1
Plug the power lead into a 220-240V, 50/60Hz, earthed AC (2-prong)
outlet.
• Caution: Do not plug the power cord into any other kind of outlet.
This will damage the machine and is not covered under the war-
ranty.
• The machine does not have a power on/off switch, so the power
is turned on and off by simply plugging in or unplugging the power
cord.
Note: If your area experiences a high incidence of lightning or power
surges, we recommend that you install surge protectors for
the power and telephone lines. Surge protectors can be pur-
chased at most telephone speciality stores.
2
Connect the handset as shown and place it on the handset rest.
3
Insert one end of the line cord into the socket on the back of the
machine marked TEL.LINE. Insert the other end into a standard sin-
gle-line wall telephone socket.
Be sure to insert the line into the TEL.LINE socket.
Do not insert into the TEL.SET socket.
About the dial mode: The fax machine is set for tone dialing. If you
are on a pulse dial line, you must set the fax machine for pulse dialing.
Press the keys on the operation panel as follows:
Make sure the handset
lead goes into the un-
marked socket on the
side of the machine!
Use the handset to make ordinary
phone calls, or to transmit and receive
faxes manually.
1. Press these keys:
The display will show:
DIAL MODE
2. Press 1 to select tone dialing, or 2
to select pulse dialing.
3. Press the STOP key to return to the date
and time display.
4
Insert the paper tray into the back of the fax as shown.
4. Loading printing paper
The paper tray holds the paper on which received documents and cop-
ies are printed. Up to 200 sheets of A4 size paper from 60 to 75 g/m
be loaded in the tray. Less sheets can be loaded when using heavier
paper. The maximum allowed paper weight is 90 g/m
Note: When receiving or copying documents, do not allow more than
100 pages to collect in the received documents outlet. Otherwise,
the outlet may become obstructed, causing paper jams.
• Caution! Do not use the blank side of paper that has already been
printed on.
1
Remove the paper cover if it is on the paper tray.
1 – 6
FUNCTION
4
Press 9 times
TONE PULSE
1
2
or
STOP
2
.
2
can