Troubleshooting And Command Line; Login Dwg & General Knowledge Of Dwg Command; Commands In "Ros#" Mode - D-Link DVG‐6008G User Manual

DVG-6008G VoIP Gateway User Manual

5. Troubleshooting and Command Line

5.1 Login DVG & General Knowledge of DWG Command
This is a document for some customers who need more details of D-LINK's products with
command lines. To make sure the system runs successfully, we suggest customers setting
DWG by GUI. In this manual, some topics such as how to check the IP, signaling and call
conversation are covered.
Tips: The document is fit for all DVG-6008Gmodels.
Run system tool Telnet to login DVG. The default username and password is "admin".
C:\Users\Administrator>telnet 172.16.101.142
Input "?" to show the all commands and its information.
Abbreviation is supported in DVG command. For example you can input "en" substitute for
"enable", input "sh" substitute for "show", input "cl" substitute for "clock",

5.2. Commands in "ROS#" Mode

There is only a litter commans in "ROS>" mode. If you need more commands you must enter
the "ROS#" mode. Input "enable" to enter "ROS#" mode if you have in the "ROS>" mode.
_______________________________________________________________________________
D-Link Corporation
76