Username & Password - D-Link DVG‐6008G User Manual

DSP Tdm Test
DSP TDM Test is the loopback of GSM side.
VoIP <-----DSP<----- Module<------ Mobile
-----> ------>
Tostart DSP TDM Test:
 Make a call test through gateway, the call can be initialed by IPPHONE. Keep the
conversation after call establish
 Click DSP TDM Testto start test
 Check the voice on both sides. VoIP sidebecome silence and echo should be
generated on Mobile phone side
 Hangup
To start DSP IP Test:
DSP IP Test is the loopback of VoIP side.
IPHONE------>VoIP------->DSP
<------ <-------
Tostart DSP IP Test:
 Make a call test through gateway, the call can be initialed by IPPHONE. Keep the
conversation after call establish
 Click DSP IP Testto start test
 Check the voice on both sides. GSM side become silence and echo should be
generated on IPPHONE side
 Hangup
4.14.13Username &Password
_______________________________________________________________________________
D-Link Corporation
------->
Figure 4-14-13Username and Password
DVG-6008G VoIP Gateway User Manual
74