Cisco A93280 Installation And Operation Manual page 32

Setting Up the Amplifier with a Handheld Terminal,
Menu Structures and Operations
The number before each menu name is the menu item number.
Menus and Descriptions
1 General Submenu1
11 Fwd Config
12 Rev Config
13 Mounted Modules
14 Power Supply
15 Temperature
2 Forward Submenu1
21 Fwd Input Att
22 Fwd Input EQ
23 Fwd Output Att
24 Fwd Output EQ
25 Power Saving
4038501 Rev C
Submenu2 Actions
111 Fwd Gain Read-write
Select 40 dB or 32 dB
112 Fwd Bandwidth Read-write
Select 862 MHz or 1 GHz
121 Rev Gain Read-write
20-28 dB, 0.5 dB step
131 Transponder Read-only
Mounted or Not Mounted
132 AGC Module Read-only
Mounted or Not Mounted
141 Remote Supply Read-only
142 24 VDC Read-only
143 12 VDC Read-only
– Read-only
1° C step
Submenu2 Actions
– Read-write
Set Fwd input attenuation
0–18 dB, Unit in 0.1 dB, 0.5 dB step
– Read-write
Set Fwd input EQ
0–18 dB, unit in 0.1 dB, 0.5 dB step
– Read-write
Set Fwd output attenuation
0–11.5 dB, unit in 0.1 dB, 0.5 dB step
– Read-write
Set Fwd output EQ
0–14 dB, unit in 0.1 dB, 0.5 dB step
– Read-write
Select ON or OFF
Operation
Continued
Continued on next page
3-9