Table of Contents
Advertisement
Tools and Accessories
Required Tools and Hardware
Before you start the installation, make sure you have the following tools and
equipment to connect and configure the amplifier.
You need a...
5 mm Allen wrench
3 mm flat-tip screwdriver
M5 screws
Ø 1.0 mm grounding wire
Torque Specifications
The following table provides the torque specifications.
Fastener
Screw on the lid
RF input/output port
connector
PE terminal
2-2
To...
Tighten the screws on the lid
Clamp the inner conductor and PE conductor
Mount the amplifier
Connect Protective Earth (PE) to the PE terminal
Torque Specification
Tighten from 6.5 Nm to 7 Nm (58 in-lb to 62 in-lb)
Tighten from 5 Nm to 6 Nm (44 in-lb to 53 in-lb)
Tighten from 2 Nm to 2.5 Nm (18 in-lb to 22 in-lb)
Installation
4038501 Rev C
Advertisement
Table of Contents
