Table of Contents
Advertisement
Overview
Introduction
This section describes the procedures for setting up and operating the amplifier.
The amplifier can be set up using a computer with an LCI software kit, or a
handheld terminal.
WARNING:
This product should be operated by qualified personnel only. Non-authorized
personnel are not allowed in the site area, otherwise physical injury or
equipment damage may occur.
In This Chapter
This chapter contains the following topics.
Starting Up the Amplifier
Setting Up the Amplifier with a Computer
Setting Up the Amplifier with a Handheld Terminal
ROSA Element Management System
Setting Up Transponders
Starting Up the Amplifier with the AGC Module
Setting Up the AGC Module
Functions of the AGC Module
Temperature Back-off
4038501 Rev C
Chapter 3
Operation
Topic
Operation
See Page
3-2
3-3
3-8
3-13
3-14
3-16
3-17
3-18
3-20
3-1
Advertisement
Table of Contents
