Operating The Tool - Makita BO4551 Instruction Manual

0
PE RAT1 0
N
CAUTION:
Do not block the motor vent with your hand.
Never run the tool without paper; you may seriously damage the
pad.
Switch Action
To start the tool:
I
Operating the Tool
To operate the tool:
1.
Hold the tool firmly.
2. Turn the
tool
on
and wait until it
attains full meed.
3. Gently place the tool onto the
workpiece and apply pressure to
sand the workpiece surface.
Operating Tips
*
A finishing sander is generally used to remove only a small amount of
material at a time. Since the quality
of
the surface is more important than
the amount of stock removed, do not bear down on the tool.
*
Keep the base flush with the workpiece at all times.
*
Excessive pressure may damage the paper and shorten tool life.
5