How To Delete A User; How To Edit A User; Safe Mode - Honeywell 6280 Series User Manual

User Setup (cont'd)

How to Delete a User

ICON
1. From the "User Setup" screen, touch the
DELETE USER icon.
2. Enter your Authorized code.
3. Touch the appropriate icon.
The Confirm Delete screen is displayed.

How to Edit a User

Note: You cannot edit a User's name or number. To modify a User name or number, you must delete the User and
re-enter User.
Edit a user as follows:
ICON
1. From the "User Setup" screen, touch the
EDIT USER icon.
2. Enter your Authorized code.
3. Select the options needed for this user
and touch the Save icon.
The configuration changes are saved and you
are returned to the "User Setup" screen.

Safe Mode

The Safe Mode may be automatically entered by the TouchCenter program on a communication failure or may be
entered manually on command.
To Exit the Safe Mode:
1. Touch the ! SAFE MODE ! bar.
2. Select "Yes" to return to the Normal Mode of operation. The TouchCenter resets and normal operation returns as
long as the original conditions that caused the entry into Safe Mode do not still exist.
ICON
1. Select Safe Mode and then touch Apply.
2. Touch the OK icon.
! SAFE MODE !
3. To exit, touch the safe mode bar and
touch Yes to return to Normal Mode.
ACTION
Three selections are available: add a user, edit a user, or delete a user.
The authorized code for deleting, adding, and editing users is dependent upon
the alarm panel you are interfacing with. Check your alarm panel Installation
and Setup Guide to determine who can delete, add, and edit users.
ACTION
Three selections are available: add a user, edit a user, or delete a user.
Note: The authorized code for deleting, adding, and editing users is
dependent upon the alarm panel you are interfacing with. Check your alarm
panel Installation and Setup Guide to determine who can delete, add, and edit
users.
ACTION
While in the Safe Mode, the Home screen displays the Security, Panic, and
Message Icon. A message !SAFE MODE! is displayed at the bottom of the
screen.
The TouchCenter resets and restarts in the Safe Mode.
NOTES
NOTES
NOTES
26