Advertisement
OPERATION
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
Reversing switch action
CAUTION:
*Always check the direction of rotation before operation.
*Use the reversing switch only after the tool comes to
a
complete stop. Changing the
*When not operating the tool, always set the reversing switch lever to the neutral position.
direction of rotation before the tool stops may damage the tool.
This tool has
a
reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the A side for
clockwise rotation or from the
€3
side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
Speed change
To change the speed, first switch off the
tool
and then slide the speed change lever
to the
"11"
side for high speed or
"1"
side
for low speed. Be sure that the speed
change lever is set to the correct position
before operation. Use the right speed for
your job.
Reversing switch lever
----r--
I
Clockwise
Counterclockwise
High speed
9
Advertisement
