NEC DT750 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Touch terminals
  5. DT750
  6. User manual

NEC DT750 User Manual

Univerge sv8100 terminal
Hide thumbs Also See for DT750:
Table of Contents

Advertisement

Quick Links

See also: User Manual
UNIVERGE SV8100 Terminal
DT750
USER'S GUIDE
ISSUE 2.0a

Advertisement

Table of Contents
loading

Related Manuals for NEC DT750

Summary of Contents for NEC DT750

  • Page 1 UNIVERGE SV8100 Terminal DT750 USER’S GUIDE ISSUE 2.0a...
  • Page 3 NEC Unified Solutions reserves the right to change the specifications, functions, or features, at any time, without notice. NEC Unified Solutions has prepared this document for use by its employ- ees and customers. The information contained herein is the property of NEC Unified Solutions and shall not be reproduced without prior written approval from NEC Unified Solutions.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS 1 Introduction Face Layout ............................ 1 Technical Specifications ......................... 2 Keys and Parts ..........................3 Menu ............................... 6 DESI-less Display ........................... 8 Softkeys ............................11 Icon Display ..........................16 Shortcut Menu ..........................17 2 Terminal Setup Setup with Up/Down Key ......................19 To Adjust Handset Receiver Volume ..................
  • Page 6 TABLE OF CONTENTS To Change Password ......................44 To Reset Telephone Settings ....................46 To Download a File ......................... 47 To Backup Personal Settings ....................55 To Restore Personal Settings ....................60 3 Basic Operation To Login ............................68 To Logout ............................68 To Make an External Call ......................
  • Page 7 To Make a Call from History ....................... 104 To Add Call History Data to Directory ..................104 To Edit Directory Data from Call History ..................107 To Delete All Data ........................110 6 Menu List Menu List for DT750 ........................111...
  • Page 8 TABLE OF CONTENTS 7 Online Monitoring Conditions for activating Online Monitoring Menu ..............119 Key Operation Chart ......................119 QoS Information (RTP Packet Loss (per 5 sec.), Payload, CODEC) ........119 System Information ....................... 120 Detail of System Information Menu ..................124 8 Web Programming To LOGIN ............................

  • Page 9: Introduction

    Introduction Face Layout DT750 (ITL-320C-1) 227 [mm] Exit Help Feautre Recall Answer Menu PQRS WXYZ Redial Speaker HOLD Transfer...

  • Page 10: Technical Specifications

    Technical Specifications ITEM DT750 (ITL-320C-1) Display (LCD) 5.7 inch TFT, QVGA, Touch Panel, with Backlight Display Color Color Programmable Key 32 (8 X 4) Keys (displayed on LCD) Fixed Feature Key 9 keys (with Menu/Cursor button) backlight Display and Digit Key (lit for 10 seconds when operating)

  • Page 11: Keys And Parts

    Keys and Parts (2) Call Indicator Lamp Lamp at top corner of DT750 Display flashes when a call terminates to the terminal. Also, when using Voice Mail service, the Lamp lights steadily when a message has been left. (3) LCD Color touch panel LCD (Liquid Crystal Display) provides DT750 activity information.
  • Page 12 (including Softkey information) (11) Menu This area provide the current time display and To access the local menu of DT750, such as Call information on various feature activities. Also, History, Directory or Terminal Setting. softkey information is displayed on the bottom (12) Cursor line of this area.
  • Page 13 (13) Speaker (d) Enter Controls the built-in speaker which can be used for Hands Free dialing/monitoring. LED on key DT750 has shortcut menu for frequently-used lights when key is active. features. Use this key to display the shortcut menu (see...

  • Page 14: Menu

    Menu MENU ITEM DESCRIPTION From the key, the user can use various Menu To view Call History. There are two application features such as Directory and Call types of Call History features. On the History. one hand, the history data is stored in the server (system) memory (see To Display Menu List History...
  • Page 15 NAVIGATIONAL MENU ITEM DESCRIPTION DESCRIPTION To make the setting of DT750 (such Enters or stores the settings that as ringing volume control, LCD were changed. Setting display setting and download of Music on Hold). For details, see Setup with Operates the same way as a...

  • Page 16: Desi-Less Display

    DESI-less Display (a) Status Icon Status information on the Line key such as Desi-less display service provides 32 (eight keys x call termination, Call Hold or Busy can be four pages) Programmable Line/Feature keys. indicated as following Icons. Information set to each Programmable Line/ FLASHING Feature key can be displayed on the LCD.
  • Page 17 (b) Programmable Key Information The following shows an example of LCD display when One-Touch Speed Dial Key is Programmable Key Information is displayed assigned to a Programmable Key. For as follows: One-Touch Speed Dial Key, No status icon is displayed. NUMBER DESCRIPTION OF DIGITS...
  • Page 18 Example of Page Switching Form Page 1 to 3 LINE 01 LINE 05 FLASHING LINE 02 LINE 06 LINE 03 LINE 07 LINE 04 LINE 08 Touch flashing button Switch from PAGE 1 to PAGE 3 to go to Page 3. LINE 17 LINE 21 INCOMING...

  • Page 19: Softkeys

    Softkeys Exit Key Press to exit from the Menu or Help mode and go The softkeys on DT750 provide a set of functions back to the time display. on the LCD that adapts to the changing state of the telephone. While default softkey settings are...
  • Page 20 BUSY IDLE 2-12 THU 8:19AM 2-12 THU 8:19AM BUSY 2200 J. Jones List VMsg ↓ InPg ExPg ↓ CONNECTION DIAL TONE/DIALING 2-12 THU 8:19AM 2-13 WED 5:40PM TALKING TO STA 12345 ExPg InPg ↓ CONF TRANSFER/HOLD Line 023 5:40PM 2-13 WED 9XXXXXXXXX STA 12345678 HOLD...
  • Page 21 Softkey Features CW (Call Waiting) Enables a busy station to receive a second When the softkey corresponding to a desired feature name is operated, the selected feature incoming call. A camp-on indication tone is sent to the busy station, and the user can use a name starts to blink on the LCD.
  • Page 22 CONF (Three-way Calling) C-RPT (ISDN Malicious Call Trace) Enables a station user to establish a three-way Allows the user to initiate a Call Trace on ISDN conference by connecting an additional party to an calls only. already existing conversation. G-SPD (Speed Calling – Group) VOICE (Voice Call) Allows a station user to share a set of common Enables the user to make a call to the called...
  • Page 23 RLS (Release Key) CHCNF (Call Hold – Conference) Allows the user to release the current call when Allows a station user to establish a conference using the headset, without waiting for the party to connection by adding a third party, who is held on hang up.

  • Page 24: Icon Display

    Icon Display FEATURE ICON DESCRIPTION The LCD of DT750 displays Desktop Icons which This icon appears when there is provide notification when events (such as missed Missed a missed call. Once the user has call and voice mail) occur. Call checked the missed call, this icon will disappear.

  • Page 25: Shortcut Menu

    Shortcut Menu As shown in the figure below, DT750 has Shortcut Menu for frequently-used features. The user can access to Shortcut Menu by pressing (Enter) key. Press Enter Key [Shortcut Menu] Answer 1 Missed Calls Menu 2 Voice Mail Receive IM...
  • Page 26 This page is for your notes.

  • Page 27: Terminal Setup

    Terminal Setup This chapter describes operating procedures for terminal settings. Various terminal settings such 31314 31310 as display, sounds, password, and language are 31311 31315 available. 31312 31316 Setup with Up/Down Key 31313 31317 To Adjust Handset Receiver Volume 2- 9 MON 8:40AM Line 022 00:27 Press (Up) or...

  • Page 28: Setup With Menu Key

    Setup with Menu Key [Setting] User Setting or ↑/↓ softkey to move the cursor On the Menu, use up/down a line. Download Data Backup/Restore The user can also navigate through the menu with touch panel operation. To Enable/Disable Off-Hook Ringing ↓...

  • Page 29: To Set Ringing Of Headset

    To Set Ringing of Headset [Incoming Call] The procedure below shows how to enable/disable Ring Volume the ringing of headset. Offhook Ring Headset Ring 1. While indicating the current time on LCD, press Ring Tone key to open the Menu screen. Menu Illumination 2.

  • Page 30: To Set Ringer Tone

    4. Select Incoming Call and then press (Enter), (Right-cursor) or OK softkey [Headset Ring] (or press key). Disable [User Setting] 2 Enable Incoming Call Talk Display Change Password Back ↓ Security Peripherals Setting Reset Default setting is 1 Disable. Back ↓...
  • Page 31 [Menu] [User Setting] Incoming Call Talk History Directory Tool Call Func. Display Change Password Security Presence Favorite Setting Config Peripherals Setting Reset ↓ Back Back ↓ 3. Select User Setting and then press 5. Select Ring Tone and then press (Enter), (Right-cursor) or OK softkey (Enter),...
  • Page 32 FREQUENCY (Hz) [Ring Tone] NO. MENU ITEM REMARKS External Call Automatic 16Hz modulation Internal Call Tone Type1 16Hz modulation Tone Type2 8Hz modulation Tone Type3 1400 1100 Door Phone Tone Type4 1100 No modulation Tone Type5 No modulation Tone Type6 1100 1400 16Hz modulation...

  • Page 33: To Set Illumination Pattern For Call Indication Lamp

    8. The display returns to the Ring Tone screen. Continue programming or press Exit for default [Setting] display. User Setting To Set Illumination Pattern for Call Download Indication Lamp Data Backup/Restore The procedure below shows how to set the illumination pattern for the Call Indicator Lamp. 1.

  • Page 34: To Enable/Disable Rtp Alarm

    [External Call] [Incoming Call] Automatic Ring Volume Offhook Ring Disable Headset Ring Green Ring Tone Blue Illumination Yellow Headset Ring Volume Purple Back Light Blue 6. Select External Call when setting the Back ↓ illumination pattern for external calls. Select Internal Call when setting the illumination The default setting is 0 Automatic.
  • Page 35 [Menu] [User Setting] Incoming Call Talk History Directory Tool Call Func. Display Change Password Security Presence Favorite Setting Config Peripherals Setting Reset ↓ Back Back ↓ 3. Select User Setting and then press 5. Select RTP Alarm and then press (Enter), (Right-cursor) or OK softkey (Enter),...

  • Page 36: To Enable/Disable Dtmf Tone

    To Enable/Disable DTMF Tone [RTP Alarm] The procedure below shows how to enable/disable Automatic RTP alarm. Disable 1. While indicating the current time on LCD, press Enable key to open the Menu screen. Menu 2. Select Setting and then press (Enter) or OK softkey (or press key).

  • Page 37: Incoming Call

    4. Select Talk and then press (Enter), [DTMF Tone] (Right-cursor) or OK softkey (or press key). Automatic [User Setting] Disable Enable Incoming Call Talk Display Change Password Back Security Peripherals Setting Reset MENU ITEMS DESCRIPTIONS Follow the setting on the System. If no Back ↓...

  • Page 38: To Set Key Touch

    The procedure below shows how to set Key Touch User Setting Tone. Key Touch Tone is a tone generated when the Download digit keys are pressed while DT750 is off-hook. Data Backup/Restore 1. While indicating the current time on LCD, press key to open the Menu screen.

  • Page 39: To Set Music On Hold

    To Set Music on Hold Key Touch Tone The procedure below shows how to set Music on Hold Music Hold to be heard by DT750 user. Prefix 1. While indicating the current time on LCD, press key to open the Menu screen.
  • Page 40 [Setting] [Talk] RTP Alarm User Setting DTMF Tone Download Data Backup/Restore Key Touch Tone Hold Music 5 Prefix ↓ Back ↓ Back 4. Select Talk and then press (Enter), 6. Select Default when the default data (Right-cursor) or OK softkey (or press (Menuet) is used as Music on Hold.

  • Page 41: To Set Clock Format

    7. The display returns to the Talk screen. [Setting] Continue programming or press Exit for default User Setting display. Download To Set Clock Format Data Backup/Restore Determines whether time is displayed with a 12-hour or 24-hour clock format. This setting is available for Time Display only. Call Log feature displays the time in 24-hour format regardless of ↓...

  • Page 42: To Enable/Disable Volume Level Display

    [Display] MENU ITEM MEANING Time Format Follow the setting on the system. 0 Automatic Local Volume (default) Screen Saver 1 12 hour Indication 12-hour clock Back Light 2 24 hour Indication 24-hour clock Font Size Language For the setting on the System, contact to the 7 Advanced System Administrator.
  • Page 43 [Menu] [User Setting] Incoming Call Talk History Directory Call Func. Tool Display Change Password Security Presence Favorite Setting Config Peripherals Setting Reset ↓ Back Back ↓ 3. Select User Setting and then press (Enter), (Right-cursor) or OK softkey 5. Select Local Volume and then press (or press key).

  • Page 44: To Set Brightness Of Backlight

    2. Select Setting and then press (Enter) or OK softkey (or press key). [Local Volume] Automatic [Menu] Disable Enable History Directory Call Func. Tool Presence Favorite Setting Config Back ↓ ↓ Back MENU ITEM MEANING 3. Select User Setting and then press Each volume level is displayed on LCD (Enter), (Right-cursor) or OK softkey...

  • Page 45: To Change Character Size

    [User Setting] [Back Light] Incoming Call Level 1 (Bright) Talk Level 2 Display Level 3 Change Password 4 Level 4 (Dark) Security Peripherals Setting Reset Back ↓ ↓ Back 5. Select Back Light and then press The currently enabled item is highlighted. (Enter), (Right-cursor) or OK softkey (or press...
  • Page 46 [Menu] [User Setting] Incoming Call Talk History Directory Tool Call Func. Display Change Password Security Presence Favorite Setting Config Peripherals Setting Reset ↓ Back Back ↓ 3. Select User Setting and then press 5. Select Font Size and then press (Enter), (Enter), (Right-cursor) or OK softkey...

  • Page 47: To Set A Language

    [Font Size] [Menu] Standard (16dot) Small (12dot) History Directory Tool Call Func. Presence Favorite Setting Config ↓ Back Back ↓ 3. Select User Setting and then press The currently enabled item is highlighted. (Enter), (Right-cursor) or OK softkey (or press key).

  • Page 48: To Enable/Disable Wallpaper Operation

    [User Setting] [Language] Incoming Call Automatic Talk Japanese Display NEC English Change Password NEC Portuguese Security NEC Spanish Peripherals NEC French Setting Reset German Back Italian ↓ Back ↓ 5. Select Language and then press (Enter), (Right-cursor) or OK softkey The currently enabled item is highlighted.
  • Page 49 [Menu] [User Setting] Incoming Call Talk History Directory Tool Call Func. Display Change Password Security Presence Favorite Setting Config Peripherals Setting Reset ↓ Back Back ↓ 3. Select User Setting and then press 5. Select Advanced and then press (Enter), (Right-cursor) or OK softkey (Enter), (Right-cursor) or OK softkey...

  • Page 50: To Enable/Disable Touch Panel Operation

    touch panel operation. [Advanced] 1. While indicating the current time on LCD, press Wallpaper Select key to open the Menu screen. Menu Touch Panel 2. Select Setting and then press (Enter), Shortcut Icon (Right-cursor) or OK softkey (or press Font Color key).
  • Page 51 4. Select Display and then press (Enter), (Right-cursor) or OK softkey (or press [Advanced] key). Wallpaper Select Touch Panel [User Setting] Shortcut Icon Incoming Call Font Color Talk Display Change Password Security Back Peripherals Setting Reset 7. Select either Disable or Enable.

  • Page 52: To Change Password

    To Change Password [Setting] To change an existing password, follow the User Setting procedure below. This password is used for the Download following occasions. Data Backup/Restore • To lock/unlock the telephone • To delete the directory data • To reset the telephone settings 1.
  • Page 53 [Change Password] [Change Password] Old Pass Old Pass **** New Pass New Pass **** Retry Pass Retry Pass Cancel Cancel The initial password is "0000". When changing the A maximum of 32 digits (0-9, * and #) can be set as a password for the first time, enter "0000"...

  • Page 54: To Reset Telephone Settings

    [Password] [Menu] Password Error History Directory Tool Call Func. Presence Favorite Setting Config ↓ Back 9. The display returns to the User Setting screen. 3. Select User Setting and then press Continue programming or press Exit for default (Enter), (Right-cursor) or OK display.

  • Page 55: To Download A File

    [Setting Reset] display. Input a password. To Download a File DT750 user can download files for Music on Hold, Ringer Tone, Directory and Wallpaper. When downloading these files, the DT750 needs to be connected to the network that has FTP (TFTP ********* server).
  • Page 56 1. Set up the FTP/TFTP server. [Setting] <FTP server> Put the downloading file into the designated User Setting directory of the FTP server. Download <TFTP server> Data Backup/Restore Put the downloading file into a desired directory of TFTP server and then specify it as the directory for downloading.
  • Page 57 9. Select User ID and then press (Enter), (Right-cursor) or OK softkey (or press [Protocol] key). TFTP [FTP Settings] User ID Password Folder ↓ Back ↓ Back 7. The display goes back to the Download Menu screen. 10. Enter a User ID by using digit keys, then press (Enter) or OK softkey.
  • Page 58 11. The display goes back to the FTP Settings screen. Select Password and then press (Enter), (Right-cursor) or OK softkey (or press key). [FTP Settings] User ID Password Folder Back ↓ 12. Enter a password by using digit keys, then press (Enter) or OK softkey.
  • Page 59 13. The display goes back to the FTP Settings 15. The display goes back to the FTP Settings screen. Select Folder and then press screen. Press (Left-cursor) or Back (Enter), (Right-cursor) or OK softkey softkey to display the Download Menu screen. (or press key).
  • Page 60 [Download Address] When downloading a file : Select Hold Music and go for Music on Hold Step 20. on page ‘*‘For‘.‘ When downloading a file : Select Ring Tone and go to for ringer tone Step 20. on page When downloading a file : Select Directory and go to for directory...
  • Page 61 [Ring Tone] [Download 1/2/3] Download 1 Input a file name. Download 2 Download 3 Melody1.wav Cancel Exec Back ↓ 21. The default file name will be displayed. FILE FORMAT MAXIMUM SIZE When downloading a file for Music on Hold, the PCM µ-low 16kHz/s wav under 15 seconds default file name is “MOH.wav”.
  • Page 62 The power to FTP/TFTP “Saving...”. server or network equipment Turn on the power. is OFF. Be sure not to turn OFF the DT750 while "Saving..." is Reconnect the cable LAN cable is disconnected. displayed on the LCD. securely. 24. After the downloading process is complete, the...

  • Page 63: To Backup Personal Settings

    To Backup Personal Settings [Menu] DT750 user can backup personal settings of DT750 to FTP/TFTP server. To back up the setting data, the DT 750 needs to be connected to the network that has FTP (TFTP server). History Directory Call Func.
  • Page 64 8. Select FTP Settings and then press (Enter), (Right-cursor) or OK softkey [Backup/Restore] (or press key). Data Backup Data Restore [Backup/Restore] Server Address Data Backup Protocol Data Restore FTP Settings Server Address Protocol Back FTP Settings ↓ 6. Select a protocol used by the destination server. After making a selection, press (Enter) or Back...
  • Page 65 [User ID] [Password] Input a user ID. Input a password. Back Back For details on character entry method, see How to Input For details on character entry method, see How to Input Characters on page Characters on page 11. The display goes back to the FTP Settings 13.
  • Page 66 [Folder] [Backup/Restore] Input a folder name. Data Backup Data Restore Server Address Protocol 5 FTP Settings Back ↓ Back For details on character entry method, see How to Input 17. Enter an IP address of the destination FTP/ Characters on page TFTP server.
  • Page 67 While making a backup copy, the LCD displays 19. The default file name will be displayed as “Uploading...” first and then “Saving...”. follows: Be sure not to turn OFF the DT750 while "Saving..." is displayed on the LCD. [Data Backup] Input a folder name.

  • Page 68: To Restore Personal Settings

    DT750 user can restore the personal settings of DT750. To download the backup file to the 4. Select Data Backup/Restore and then telephone, the DT750 needs to be connected to the press (Enter), (Right-cursor) or OK network that has FTP (TFTP server).
  • Page 69 8. Select FTP Settings and then press [Backup/Restore] (Enter), (Right-cursor) or OK softkey (or press key). Data Backup Data Restore [Backup/Restore] Server Address Protocol Data Backup Data Restore FTP Settings Server Address Protocol Back ↓ FTP Settings 6. Select a protocol used by the destination server. After making a selection, press (Enter) or Back...
  • Page 70 [User ID] [Password] Input a password. Input a user ID. Back Back For details on character entry method, see How to Input For details on character entry method, see How to Input Characters on page Characters on page 11. The display goes back to the FTP Settings 13.
  • Page 71 [Backup/Restore] [Folder] Input a folder name. Data Backup Data Restore Server Address Protocol FTP Settings Back Back ↓ 17. Enter an IP address of the FTP/TFTP server For details on character entry method, see How to Input Characters on page which stores the backup file.

  • Page 72: Data Backup

    While downloading the backup data, the LCD displays “Downloading...” first and then “Saving...” Back ↓ Be sure not to turn OFF the DT750 while "Saving..." is 19. The default file name will be displayed as displayed on the LCD. follows: 21.
  • Page 73 A different file name is Set the same file name from specified between DT750 both DT750 and FTP/TFTP and FTP/TFTP server. server. Incorrect IP address of FTP/ Set the proper IP address of TFTP server has been FTP/TFTP server.
  • Page 74 This page is for your notes.

  • Page 75: Basic Operation

    Basic Operation This chapter describes the following basic operation of DT750. • To Login • To Logout • To Make an External Call • To Make an Internal Call • To Answer an External Call • To Answer an Internal Call •...

  • Page 76: To Login

    To Login To Logout 1. When login mode is activated, the telephone 1. Press the preassigned Logout softkey on the prompts for Login ID and Password. terminal. Time/Feature Activity The softkey location is an example. Information Area of LCD Login ID : For the assignment of Logout softkey, contact the System Password Administrator.

  • Page 77: To Make An External Call

    To Make an External Call To Make an Internal Call 1. Lift handset or press key, receive dial 1. Lift handset or press key, receive dial Speaker Speaker tone. tone. 2. Dial the Central Office access code, e.g., 9. 2. Dial a desired station number. Display indicates the dialed number.

  • Page 78: To Answer An External Call

    To Answer an External Call To Answer an Internal Call The following procedure explains how to answer 1. You hear the ringing tone, and key and Answer an internal call. Call Indicator Lamp flash red. 1. You hear the ringing tone, and key and Answer Line 001...

  • Page 79: Multiline Appearance

    Multiline Appearance To Hold a Call This feature allows users to accommodate the 1. Press key to hold the call in progress. HOLD lines (other telephone’s station number) other than My Line on the Programmable Line/Feature Keys. When accommodating other telephone’s station Held Station Number number on the Programmable Line/Feature Key, 2-13 WED...

  • Page 80: To Transfer A Call

    To Transfer a Call One-Touch Speed Calling Keys To Make a Call 1. During a conversation, press key. Transfer Receive Special Dial Tone. The first party is 1. Touch the desired One-Touch Speed Calling placed on hold and hears the music on hold. key on the display.

  • Page 81: To Verify

    0821111 1:25 PM TUE 18 MAR 2008 For the key to which no name information is registered, the character "SPD" will be displayed. 3. Enter desired name on the keypad. Display indicates the name entered. NEC BNET ← → >>>...

  • Page 82: Speed Calling - Station/Group

    4. Press >>> softkey twice to display the following softkeys. To Set 1. Press key. Receive Dial Tone. Speaker Speaker NEC BNET key lamp lights red. >>> CLEAR CANCEL 2. Dial the Speed Calling – Station/Group Access Code. 5. Press SET softkey to save the entered name.

  • Page 83: To Make A Call

    3. Lift the handset. key lamp goes off. Speaker XXXX 1:25 PM TUE 18 MAR 2008 2. If the DT750 does not have the “Speed Calling – System” key, dial the Speed Calling – System Access Code, then the abbreviated call code.

  • Page 84: Last Number Redial

    Last Number Redial Three-Party Conference 1. Press (Redial) key. The user hears Dial 1. While Stations A and Station B are engaged in a tone and the last number dialed is displayed. Two-party connection, Station A presses Conf key lamp lights red. softkey.

  • Page 85: Voice Mail System

    Voice Mail System To Access 1. Press (Enter) key. The Shortcut menu screen is displayed on LCD. 2. Select Voice Mail and then press (Enter), (Right-cursor) or OK softkey to access a preset Voice Mail System. 3. Hear ringback tone. 4.

  • Page 86: How To Input Characters

    How to Input Characters This section explains how to enter characters on the text input screen such as Name or User ID, etc. Character Entry Mode When entering characters from the telephone set, the following three modes are available: uppercase alphabetic character, lowercase alphabetic character and numeric character.

  • Page 87: Character Code List

    Character Code List <Character Code For English (1/2)> DIGIT CASE 10th 11th 12th 13th SHIFT ¥ [SP]...
  • Page 88 <Character Code For English (2/2)> 10th 11st 12st 13st 14st 15st 16st 17st 18st 19st 20st & " 21st 22st 23st 24st 25st 26st 27st 28st 29st 30st < > Used as a case shift key. Shifts the characters between uppercase, lowercase and numeric.
  • Page 89 <Character Code For Russian> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT & ¿ ¡ Б В Г а б в г Д Е Ё Ж З д е ё ж з И Й К Л и й к л...
  • Page 90 <Character Code For Turkish> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT & ¿ ¡ Ç ç Ğ İ ğ Ö ö Ş Ş Ü ü [SP]...
  • Page 91 <Character Code For Other Languages> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT & ¿ ¡ À Á Â Ã Ä Å Æ Ç à á â ã ä å æ ç È É Ê Ë è é ê ë...
  • Page 92 <Number Code> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT ¥ & Used as a case shift key. Shifts the characters between uppercase, lowercase and numeric. When entering password , “0-9”, “*” and “#” are available. “#” is entered by pressing key.
  • Page 93 <Number Code> DIGIT CASE 10th 11th 12th 13th 14th 15th SHIFT ¥ & ¥¥ Used as a case shift key. Shifts characters between uppercase, lowercase and numeric.

  • Page 94: Character Entry Method

    Character Entry Method 3. Enter “en” by using digit keys. Press key twice to enter “e”. As an example of character entry method, the Press key twice to enter “n“. following shows how to enter “Ken Kobus”. • Press the to switch the text input mode from [User ID] uppercase to lowercase or numeric.

  • Page 95: To Delete A Character

    [User ID] [User ID] Input a user ID. Input a user ID. Kobus Back Back 7. Press the to switch the text input mode from 9. Press (Enter) or OK softkey to store the uppercase to lowercase. data. To Delete a Character [User ID] Use the (Left-cursor) or...

  • Page 96: Security Mode

    Security Mode 2. Press (Enter) or OK softkey to place DT750 in Security mode. DT750 has the Security key which prevents 3. When the telephone is placed in Security mode, information leakage from terminal. While the Security Lamp lights red and the screen saver telephone is locked, Security Lamp lights up.
  • Page 97 Password Error. Retry? Cancel After a third attempt (if incorrect password entered three times), the following error message is issued. Press or OK softkey. The telephone locks up, and any key operation will be disabled for 10 minutes. After 10 minutes, make a retry.

  • Page 98: Emergency Call

    Emergency Call The user can make a call to only the predetermined number. When telephone numbers other than the The user can make a call to a predetermined predetermined emergency number are dialed, the emergency telephone number while the telephone following message appears (after a few seconds, the is locked (in Security mode).

  • Page 99: Directory Operation

    Directory Operation This chapter explains about Personal Directory [Menu] function of DT750. By using Personal Directory function, the user can make a call with simple operation. History Directory Tool Call Func. Personal Directory function can register up to 500 entries. The user can add/view/edit/delete these...

  • Page 100: To Change Group Name

    To Change Group Name 6. After entering the name or telephone, press the key. HOLD 1. Open the Directory screen (see To Add New 7. The following list appears. Select a desired Data on page 91). group by entering a number. 2.
  • Page 101 [Group Name Set] [Group] Input a group name. Default Colleagues VIPs Family Friends Default Group 6 Group 7 Option Back Group 8 ↓ Back For details on character entry method, see How to Input Characters on page 4. Select Name and then press (Enter), (Right-cursor) or OK softkey (or press Up to 32 characters can be entered as a group name.

  • Page 102: To Find A Registered Data

    To Find a Registered Data 4. Select a search method from the following list. 1. While indicating the current time on LCD, press [SEARCH MENU] key to open the Menu screen. Menu NAME 2. Select Directory and then press (Enter) or OK softkey (or press key).

  • Page 103: To Make A Call From Directory

    To Make a Call from Directory TLBK1: SEARCH NUMBER < While Directory screen is being displayed, you cannot make a call by dialing a telephone number. MENU 1. While indicating the current time on LCD, press key to open the Menu screen. Menu TLBK1: SEARCH MEMORY >...

  • Page 104: To Add Prefix Number

    To Add Prefix Number TLBK1: SEARCH NAME To Set Prefix < When making a call, a prefix can be added to MENU telephone numbers to be dialed. Prefixes need to be 4. Select a search method (e.g., NAME, GRP, set in advance. NUM or MEM).
  • Page 105 [Talk] [Setting] RTP Alarm User Setting DTMF Tone Download Data Backup/Restore Key Touch Tone Hold Music Prefix Back ↓ Back 6. Select Prefix 1 and then press (Enter), 4. Select Talk and then press (Enter), (Right-cursor) or OK softkey (or press (Right-cursor) or OK softkey (or press key).

  • Page 106: To Add Prefix When Making A Call

    To Add Prefix When Making A Call [Prefix 1] 1. Display the list of applicable names (see Find a Registered Data on page 94). Select a Input a prefix number. target name by pressing (Up/Down-cursor) key and then press Option softkey. [Directory] Abe Ichiro Back...

  • Page 107: To Edit Directory Data

    To Edit Directory Data If multiple telephone numbers are registered to a target 1. Display the Name List screen for a target party party, a call is made to the first priority telephone number. (see To Find a Registered Data on page 94).

  • Page 108: To Delete All Data

    To Delete All Data 3. On the Edit screen, the detailed data for the selected name is displayed. Modify the necessary data by referring to To Add New Data 1. While indicating the current time on LCD, press on page 91.

  • Page 109: To Delete A Specific Data

    To Delete a Specific Data 4. After 4-digit password is entered, display asks if you want to delete all the directory data. To delete, press Yes. 1. While indicating the current time on LCD, press key to open the Menu screen. Menu 5.
  • Page 110 6. Select a specific group to be deleted (e.g., Group 01). 1: NEC 2142622000 7. Select 1: NEC. 2142622000 Dial 8. Press the DEL softkey to delete the appropriate directory data. 9. After the appropriate directory data is deleted, the following display appears.

  • Page 111: Call History Operation

    Call History Operation This chapter explains about Call History feature of [Menu] DT750. By using Call History, the user can make a call with simple operation. Directory History Tool Call Func. Call History feature allows the telephone to register up to 50 records into its memory. If...

  • Page 112: To Make A Call From History

    To Make a Call from History To Add Call History Data to Directory While the history data is displayed, the user cannot make a call by dialing a telephone number. 1. Display call history data of a target telephone number (see View Call History on page 103).
  • Page 113 [Category] SubMenu 13/MAR/2008 (TUE) 11:00 Company Call Ken Kobus Mobile Directory Add Tel: 7205 Voice Mail Prefix 13/MAR/2008 (TUE) 10:00 Home Delete One Abe Shintaro Delete All Others Tel: 7207 ↓ Cancel 3. Select New and then press (Enter), ↓ Back Next (Right-cursor) or OK soft key (or press...
  • Page 114 5. Select either Disable or Enable and then press (Enter) or OK soft key. [Edit] A maximum of four telephone numbers can be set Name to an entry. If Enable is selected here, the Group telephone number which is being edited will be 7205 given top priority.

  • Page 115: To Edit Directory Data From Call History

    To Edit Directory Data from Call History SubMenu 13/MAR/2008 (TUE) 11:00 Call Ken Kobus 1. Display call history data of a target telephone Directory Add Tel: 7205 number (see View Call History on page 103). Prefix 13/MAR/2008 (TUE) 10:00 The following is an example when history data of a Delete One Abe Shintaro Missed Calls is displayed:...
  • Page 116 [Directory] [Menu] [Directory Search] John Smith Group Julia Name Ken Kobus Tel Number Others ↓ Back Back 5. Select a group and then press (Enter) or If there is no corresponding data, "No data" will be OK soft key. displayed on LCD. In this example, Colleagues is selected.
  • Page 117 8. The Category Set screen is displayed. Select a [Priority Flag] Category to which the telephone number belongs. Then press (Enter) or OK soft key. Disable In this example, Company is selected. Enable [Category Set] Company Mobile Voice Mail ↓ Prev Home 10.

  • Page 118: To Delete All Data

    To Delete All Data 6. Select One to delete a single call or All to delete all call histories. 1. While indicating the current time on LCD, press Menu Key to open the Menu screen. 2142622000 Jane Doe 4-28 2:40 2.

  • Page 119: Menu List

    Uses when accessing external XML server. For details, please contact the Tool system administrator. Call Function Not used. Setting To make the user setting of DT750. Presence Not used. Favorite Not used. To make the configuration setting of DT750. For details, please contact the Config system administrator.
  • Page 120 Menu List For History MENU ITEM DESCRIPTION DEFAULT VALUE History Displays the history of missed calls. The user can also 1 Missed make a call from this menu. Displays the history of outgoing calls. The user can 2 Outgoing also make a call from this menu. Displays the history of incoming calls.
  • Page 121 Menu List For Directory MENU ITEM DESCRIPTION DEFAULT VALUE Directory Directory → From Menu screen, select Personal. 1 Search Search the personal directory. 1 Group Select a group as a search condition. 2 Name Enter the target name and then perform a search. 3 Tel Number Enter the target telephone number and then perform a search.
  • Page 122 Menu List For Tool MENU ITEM DESCRIPTION DEFAULT VALUE Tool 1 Service Activate XML browser. 2 IM Not used.
  • Page 123 Set key touch tone generated when the digit keys are 3 Key Touch Tone Automatic pressed while the telephone is off-hook. 4 Hold Music Select a Music on Hold to be heard by DT750 user. Default 5 Prefix Register Prefix number. 3 Display Settings for LCD display.
  • Page 124 MENU ITEM DESCRIPTION DEFAULT VALUE 3 Screen Server Set the screen saver for the LCD. 4 Back Light Set the brightness of the backlight. Level 2 5 Font Size Change the displayed character size on the LCD. Standard(16dot) 6 Language Select a language to be displayed on LCD.
  • Page 125 MENU ITEM DESCRIPTION DEFAULT VALUE 1 Download Files Download the files for Music on Hold, ringer tone and 1 Hold Music Download a file for Music on Hold. MOH.wav 2 Ring Tone Download files for ringer tones (Download 1 to 3). 1 Download 1 Download a file for ringer tone (Download 1).
  • Page 126 This page is for your notes.

  • Page 127: Online Monitoring

    Online Monitoring In Online Monitoring, users can see the following Key Operation Chart information on the terminal LCD. Press Help key for two seconds. QoS information (RTP Packet Loss (per 5 sec.), Payload, CODEC) System information Lost Packet Ping Codec Conditions for activating Online Payload Monitoring Menu...

  • Page 128: System Information

    XXXX 1. Network Settings 1. Last Packet : G.XXXx 2. Codec 2. SIP Settings XXms 3. Payload 3. Audio&Visual Settings Prev Prev Down Exit Lost Packet Network Settings The number of RTP packet receiving loss in SIP Settings currentlast call will be displayed per 5 second. (Displayed in eight digits.
  • Page 129 To See Network Settings Information To See SIP Settings Information Press 1 in System Information menu. Press 2 in System Information menu. Each Network Setting can be confirmed by Each SIP Setting can be confirmed by pressing pressing Up and Down key. Up and Down key.
  • Page 130 To See Audio&Visual Settings Information To See Maintenance Settings Information Press 3 in System Information menu. Press 4 in System Information menu. Each Audio&Visual Setting can be confirmed by Download address can be confirmed. pressing Up and Down key. Download Address Confirmation Tone XXX.XXX.XXX.XXX Disable/Enable...
  • Page 131 To See Terminal Information Ping Press 5 in System Information menu. To Send Ping Each terminal information can be confirmed by Press 3 in main screen, and move to Ping menu. pressing Up and Down key. Enter IP address of the server to send Ping, and press OK key.

  • Page 132: Detail Of System Information Menu

    Detail of System Information Menu SYSTEM INFORMATION ITEMS SYSTEM MENU INFORMATION ITEMS User ID MENU Terminal URI Connecting Server DHCP Mode 1st SIP Server Note1 IP Address Note1 2nd SIP Server Note1 Default Gateway Note1 3rd SIP Server Note1 Subnet Mask Note1 4th SIP Server Note1...
  • Page 133 SYSTEM INFORMATION ITEMS MENU Hardware Version MAC Address Terminal Firmware Version Information Bottom option Side Option 1 Side Option 2 Note 1: “(DHCP)” is indicated on the display when the parameter is obtained from the DHCP server. (ex.) IP Address IP Address(DHCP) XX:XX:XX:XX:XX:XX Down...
  • Page 134 This page is for your notes.

  • Page 135: Web Programming

    DT750 and Web Programming PC needs to be connected to the same network. When downloading the files for Music on Hold, Ringer Tone and Directory to the DT750, FTP (TFTP server) is required on the network. For details on the FTP service, contact to the System Administrator.

  • Page 136: To Login

    Note 1: Enter the same password used when logging into the DT750. “0000” is used as password by the default setting. For IP address of DT750, contact to the System Administrator. When the login screen does not appear, check the LAN connection status and entered IP address. If the problem persists,...
  • Page 137 The following Web Programming Home screen appears.

  • Page 138: To Logout

    To LOGOUT Follow the steps below to exit from the Web Programming. Logout Click button at the lower left of the screen. The confirmation message appears. Click button to log out of Web Programming. The display changes as follows. Click Back button.
  • Page 139 After the Web Programming Login screen is displayed, close the Internet browser. Make sure to perform the logout operation after the data setting of the telephone. When 15 minutes have passed leaving the PC without operation after log in to Web Programming, the user is forcibly logged out from the Web Programming.

  • Page 140: How To Operate

    As an example of setting method on the Web Programming, the following explains how to change the ringer tone for external call. Web Programming includes the same menu configuration as "Setting" of DT750 terminal. For details on each menu item, see...
  • Page 142 NEC UNIFIED SOLUTIONS NEC Unified Solutions Anton Philipsweg 1 1223 KZ Hilversum The Netherlands http://www.nec-unified.com...

This manual is also suitable for:

Univerge sv8100 terminal dt750

Table of Contents