NEC UNIVERGE DT750 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. IP Phone
  5. DT750
  6. User manual
NEC UNIVERGE DT750 User Manual

NEC UNIVERGE DT750 User Manual

Univerge sv8300
Hide thumbs Also See for UNIVERGE DT750:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
UNIVERGE SV8300
DT750 Terminal
USER'S GUIDE
NDA-31037
Issue 1.0
September 2009

Advertisement

Table of Contents
loading

Related Manuals for NEC UNIVERGE DT750

Summary of Contents for NEC UNIVERGE DT750

  • Page 1 UNIVERGE SV8300 DT750 Terminal USER’S GUIDE NDA-31037 Issue 1.0 September 2009...
  • Page 3 NEC Infrontia Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC Infrontia Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Infrontia Corporation and shall not be reproduced without prior written approval from NEC Infrontia Corporation.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS 1. INTRODUCTION FACE LAYOUT..................TECHINICAL SPECIFICATIONS............KEYS AND PARTS................MENU....................DESSI-LESS DISPLAY................. SOFT KEYS..................ICON DISPLAY..................SHORTCUT MENU................2. TERMINAL SETUP SETUP WITH UP/DOWN KEY ............. SETUP WITH MENU KEY..............3. BASIC OPERATION TO LOGIN..................... TO LOGOUT..................TO MAKE AN EXTERNAL CALL............
  • Page 5 TABLE OF CONTENTS TO MAKE A CALL USING SPEED CALLING (-STATION/GROUP)..TO MAKE A CALL USING SPEED CALLING – SYSTEM..... LAST NUMBER REDIAL............... THREE-PARTY CONFERENCE............SECURITY MODE................. DIAL BY NAME..................CALL HISTORY..................4. MENU LIST MENU LIST FOR DT750 ............

  • Page 7: Introduction

    NTRODUCTION FACE LAYOUT DT750 (ITL-320C-1) 227 [mm] Exit Help Feautre Recall Answer Menu PQRS WXYZ Redial Transfer Speaker HOLD...

  • Page 8: Techinical Specifications

    TECHINICAL SPECIFICATIONS ITEM DT750 (ITL-320C-1) Display (LCD) 5.7 inch TFT, QVGA, Touch Panel, with Backlight Display Color Color Programmable Key 32 (8 X 4) Keys (displayed on LCD) Fixed Feature Key 9 keys (with Menu/Cursor button) backlight Display and Digit Key (lit for 10 seconds when operating) Soft Key 4 Keys Directory...

  • Page 9: Keys And Parts

    (1) Security Button KEYS AND PARTS The user can prevent information leakage from terminal by simple operation. • KEYS AND PARTS ON DT750 (2) Call Indicator Lamp Lamp at top corner of DT750 Display flashes when a call terminates to the terminal. Also, when using Voice Mail service, the Lamp lights steadily when a message has been left.
  • Page 10 (a) Icon Area This area displays Desktop Icons which provide (9) Answer notification when events (such as missed call and When LED on this key is lit, press key to answer a voice mail) occur. waiting call. (b) Dessi-Less Information Area (10) Mic This area provides information on the 32 Press key to respond hands free.
  • Page 11 ( b) Redial (Last Call, Speed Calling-Station/ Group) LEFT Go back to the previous screen. Press key to activate redial feature. Press the redial and scroll back through numbers that Go to the screen corresponds to the have been dialed. When the desired number is RIGHT highlighted menu item.

  • Page 12: Menu

    MENU MENU ITEM DESCRIPTION Menu From t h e Key, the user can use various To use Directory features. there are application features such as Directory and Call History. three types of directory features. • Personal Directory: Controlled To Display Menu List by telephone set.

  • Page 13: Dessi-Less Display

    DESSI-LESS DISPLAY (a) Status Icon Dessi-less display service provides 32 (8 keys x 4 Status information on the Line key such as call pages) Programmable Line/Feature keys. Information termination, Call Hold or Busy can be indicated as set to each Programmable Line/Feature key can be following Icons.
  • Page 14 (b) Programmable Key Information The following shows an example of LCD display Programmable Key Information is displayed as when One Touch Speed Dial Key is assigned to a follows: Programmable Key. For One Touch Speed Dial Key, No status icon is displayed. * Users can register name on each One Touch NUMBER DESCRIPTION...
  • Page 15 (c) Page Icon Dessi-less display four pages programmable keys per page). Page key indicates currently displayed page. The user can switch the programmable key display from page 1 to 4 by touch panel operation. STATUS OF DESCRIPTION PAGE ICON Steady Lit Indicates currently displayed page.

  • Page 16: Soft Keys

    SOFT KEYS Default Displays for Each Status Default Soft Key settings are provided corresponding to The Soft Keys on DT750 provide a set of functions on particular functions. Different Soft Key settings are the LCD that adapts to the changing state of the displayed at the bottom of the LCD depending on the telephone.
  • Page 17 The following shows the Soft Key default display BUSY pattern. BUSY 2000 4:26 PM MON 24 AUG 2009 FDA (Call Forwarding – All Calls Set/Cancel) >>> Permits all calls designated for a particular station to be Push >>> routed to another station regardless of the busy or idle status of the called station.
  • Page 18 PICK (Call Pickup - Group) MIC (Microphone On/Off) This feature enables a station user to answer any call Allows the user to turn the microphone on and off directed to another station, to a station within their own for use with the speakerphone. Call Pickup Group, or to a station within a different Call Pickup Group.

  • Page 19: Icon Display

    ICON DISPLAY FEATURE ICON DESCRIPTION The LCD of DT750 displays Desktop Icons which This icon appears when there is a provide notification when events (such as missed call missed call. Once the user has and voice mail) occur. Missed Call checked the missed call, this icon will disappear.

  • Page 20: Shortcut Menu

    SHORTCUT MENU As shown in the figure below, DT750 has Shortcut Menu for frequently-used features. The user can access to Shortcut Menu by pressing key. (Enter) Press Enter Key [Shortcut Menu] Answer 1 Missed Calls Menu 2 Voice Mail Receive IM Presence Redial Bluetooth...

  • Page 21: Terminal Setup

    ERMINAL ETUP his chapter describes operating procedures for terminal DOWN settings. Various terminal settings such as display, sounds, password, and language are available. 31310 31314 31311 31315 SETUP WITH UP/DOWN KEY 31312 31316 • TO ADJUST HANDSET RECEIVER 31313 31317 VOLUME 31310 Press Up/Down Cursor key in the off-hook status...

  • Page 22: Setup With Menu Key

    SETUP WITH MENU KEY [Menu] Note: or ↑/↓ soft key to move On the Menu, use the cursor up/down a line. History Directory Tool Call Func. Note: The user can also navigate through the menu with touch panel operation. Setting Config Presence Favorite...
  • Page 23 [Offhook Ring] [User Setting] Incoming Call 1 Disable Talk Enable Display Change Password Security Peripherals Back Setting Reset ↓ Back Note: Default setting is 2 Enable. Note: The currently enabled item is highlighted. Select 2 Offhook Ring and then press (Enter) or OK soft key.
  • Page 24 • TO SET RINGING OF HEADSET [Setting] The procedure below shows how to enable/disable the User Setting ringing of headset. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter) ↓...
  • Page 25 [Incoming Call] Ring Volume Offhook Ring Headset Ring Ring Tone Illumination Headset Ring Volume ↓ Back To disable/enable the ringing of headset, select 1 Disable or 2 Enable. Then, press (Enter) OK soft key. [Headset Ring] Disable Enable ↓ Back Note: Default setting is 1 Disable.
  • Page 26 • TO SET RINGER TONE [Setting] The procedure below shows how to change the ringer User Setting tone for internal call and external call. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter)
  • Page 27 [External Call] [Incoming Call] Automatic Ring Volume Tone Type 1 Offhook Ring Tone Type 2 Headset Ring Tone Type 3 Ring Tone Tone Type 4 Illumination Tone Type 5 Headset Ring Volume Tone Type 6 ↓ Tone Type 7 Back ↓...
  • Page 28 Frequency (Hz) Menu Item Remarks 14 Tone Type14 Melody 5 Download1 Download2 Download3 Note: The user can set ringer tone for the telephone set here. Ringer Tone type can be set for “Name”, “Group” and “Telephone set”. The ringer Tone type set for “Name”...
  • Page 29 • TO SET ILLUMINATION PATTERN FOR [Setting] CALL INDICATION LAMP User Setting Download The procedure below shows how to set the illumination Data Backup/Restore pattern for the Call Indicator Lamp. While indicating the current time on LCD, press Menu key to open the Menu screen. ↓...
  • Page 30 [Incoming Call] [External Call] Ring Volume Automatic Offhook Ring Disable Headset Ring Ring Tone Green Illumination Blue Headset Ring Volume Yellow Purple Back Light Blue ↓ Back Select 1 External Call when setting the illumina- tion pattern for external calls. Select 2 Internal Note: The default setting is 0 Automatic.
  • Page 31 • TO ENABLE/DISABLE RTP ALARM [Setting] The procedure below shows how to enable/disable User Setting RTP alarm. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter) ↓...
  • Page 32 Note: For the setting on the System, contact to the Sys- [Talk] tem Administrator. RTP Alarm Note: The currently enabled item is highlighted. DTMF Tone Key Touch Tone Hold Music Prefix ↓ Back Select 0 Automatic, 1 Disable or 2 Enable (see the following table).
  • Page 33 • TO ENABLE/DISABLE DTMF TONE [Setting] The procedure below shows how to enable/disable User Setting RTP alarm. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter) ↓...
  • Page 34 [Talk] 1 RTP Alarm DTMF Tone Key Touch Tone Hold Music Prefix ↓ Back Select 0 Automatic, 1 Disable or 2 Enable (see the following table). Then, press (Enter) OK soft key. [DTMF Tone] 0 Automatic Disable Enable Back Menu Items Descriptions Follow the setting on the System.
  • Page 35 • TO SET KEY TOUCH [Setting] The procedure below shows how to set Key Touch User Setting Tone. Key Touch Tone is a tone generated when the Download digit keys are pressed while DT750 is off-hook. Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen.
  • Page 36 [Talk] 1 RTP Alarm DTMF Tone Key Touch Tone Hold Music Prefix ↓ Back Select 0 Automatic, 1 No Tone, 2 Tone or 3 Voice. Then, press or OK soft key. (Enter) [Key Touch Tone] Automatic No Tone Tone Voice ↓...
  • Page 37 • TO SET MUSIC ON HOLD [Setting] The procedure below shows how to set Music on Hold User Setting to be heard by DT750 user. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter)
  • Page 38 [Talk] 1 RTP Alarm DTMF Tone Key Touch Tone Hold Music Prefix ↓ Back Select 1 Default when the default data (Menuet) is used as Music on Hold. Select 2 Download when a downloaded data is used as Music on Hold. Then, press or OK soft key.
  • Page 39 • TO SET CLOCK FORMAT [Setting] Determines whether time is displayed with a 12-hour or User Setting 24-hour clock format. Download Data Backup/Restore Note: This setting is available for Time Display only. Call Log feature displays the time in 24-hour for- mat regardless of this setting.
  • Page 40 [Display] [Time Format] Time Format Automatic Local Volume 12 hour Indication Screen Server 24 hour Indication Back Light Font Size Language Advanced ↓ ↓ Back Back After Making a selection, press or OK (Enter) Make a selection from the following list. soft key.
  • Page 41 • TO ENABLE/DISABLE VOLUME LEVEL [Setting] DISPLAY User Setting Download Determines whether or not to display the following Data Backup/Restore volume levels: handset receiver volume, speaker volume, ringer tone volume and LCD contrast. While indicating the current time on LCD, press Menu key to open the Menu screen.
  • Page 42 [Display] [Local Volume] 1 Time Format Automatic Local Volume Disable Screen Server Enable Back Light Font Size Language Advanced ↓ ↓ Back Back After making a selection, press or OK (Enter) Make a selection from the following list. soft key. Menu Item Meaning Each volume level is displayed on LCD...
  • Page 43 • TO SET BRIGHTNESS OF BACKLIGHT [Setting] The following explains how to set the brightness level User Setting of the LCD backlight. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter)
  • Page 44 [Display] 1 Time Format Local Volume Screen Server Back Light Font Size Language Advanced ↓ Back Select a desired brightness level (default: Level 2). The currently enabled item is highlighted. Note: [Back Light] 1 Level 1 (Bright) Level 2 Level 3 Level 4 (Dark) ↓...
  • Page 45 • TO CHANGE CHARACTER SIZE [Setting] The following explains how to change the displayed User Setting character size on the LCD. Download While indicating the current time on LCD, press Data Backup/Restore Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter) key.)
  • Page 46 [Display] 1 Time Format Local Volume Screen Server Back Light Font Size Language Advanced ↓ Back Select either “Standard(16dot)“ of “Small(12dot)“. [Font Size] Standard (16dot) Small(12dot) ↓ Back The currently enabled item is highlighted. Note: After Making a selection, press or OK (Enter) soft key.
  • Page 47 • TO SET A LANGUAGE [Setting] The following explains how to set a language to be User Setting displayed on LCD. Download Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press (Enter) (Right- ↓...
  • Page 48 Local Volume Screen Server Back Light Font Size Language Advanced ↓ Back Select a desired language. [Language] Automatic Japanese NEC English NEC Portuguese NEC Spanish NEC French German Italian ↓ Back The currently enabled item is highlighted. Note: After Making a selection, press...
  • Page 49 • TO ENABLE/DISABLE TOUCH PANEL OPERATION [Setting] User Setting The following explains how to enable/disable the touch Download panel operation. Data Backup/Restore While indicating the current time on LCD, press Menu key to open the Menu screen. Select Setting and then press (Enter) (Right- ↓...
  • Page 50 [Touch Panel] [Display] Disable 1 Time Format Enable Local Volume Screen Server Back Light Font Size Language Back Advanced Back Note: The currently enabled item is highlighted. Select 2 Touch Panel and then press (Enter) or OK soft key. (or press 2 key.) (Right-cursor) [Advanced] Wallpaper Select...

  • Page 51: To Change Password

    • TO CHANGE PASSWORD [Setting] To change an existing password, follow the procedure User Setting below. This password is used for the following Download occasions. Data Backup/Restore • To lock/unlock the telephone. • To delete the directory data. • To reset the telephone settings. ↓...
  • Page 52 [Change Password] [Change Password] Old Pass Old Pass **** New Pass New Pass **** Retry Pass Retry Pass Cancel Cancel Note: The initial password is "0000". When changing Note: A maximum of 32 digits (0-9, * and #) can be set the password for the first time, enter "0000"...
  • Page 53 [Password] Password Error...
  • Page 54 • TO RESET TELEPHONE SETTINGS [Setting] The following explains how to clear the personal data of User Setting the telephone. Download While indicating the current time on LCD, press Data Backup/Restore Menu key to open the Menu screen. Select Setting and then press or OK soft (Enter) key.)
  • Page 55 [Setting Reset] Input a password. ********* Back Press or OK soft key to clear the per- (Enter) sonal data of the telephone. [Setting Reset] Are you sure? Back...
  • Page 56 • TO DOWNLOAD A FILE [Menu] DT750 user can download files for Music on Hold, Ringer Tone and Directory. When downloading these History Directory Tool files, the DT750 needs to be connected to the network Call Func. that has FTP (TFTP server). Note: For details on the FTP/TFTP service, contact to Setting...
  • Page 57 When 1 FTP is selected here, go to the [Download Menu] next Step (STEP 7). 1 Download Files Download Address When 2 TFTP is selected here, go to the Protocol next STEP 15. FTP Settings 4 FTP Settings and then press STEP 7: Select or OK soft key.
  • Page 58 (or press 2 key.) [FTP Settings] [FTP Settings] User ID Password 1 User ID Folder Password Folder ↓ Back ↓ Back STEP 9: Enter a User ID by using digit keys, then press or OK soft key. STEP 11:Enter a password by using digit keys, then (Enter) press or OK soft key.
  • Page 59 or OK soft key. STEP 14:The display goes back to the FTP Settings (Enter) (Right-cursor) (or press 3 key.) screen. Press or Back soft (Left-cursor) key to display the Download Menu screen. [FTP Settings] [FTP Settings] 1 User ID User ID Password Password Folder...
  • Page 60 which stores the download file. For example, to set the IP address of 10.41.208.205, enter STEP 18:Select a file to be downloaded. 10*41*208*205 [separate with an asterisk (*)]. When downloading a file :Select 1 Hold Music and go for Music on Hold to STEP 18.
  • Page 61 - When downloading a file for ringer tone, the default file name is “Melody1/2/3/.wav”. [Ring Tone] Download 1 [Download 1/2/3] Download 2 Input a file name. Download 3 Meloady1.wav ↓ Back Exec Cancel File Format Maximum Size STEP 20:The default file name will be displayed. -low 16kHz/s wav.
  • Page 62 When changing the file name, go to the next the display changes as follows: step (STEP 19). When not changing the file name, go to STEP 20. STEP 21:Press BK soft key once to delete the default Download Complete! file name and then enter a new file name by Exit using the digit keys.
  • Page 63 • TO BACKUP PERSONAL SETTINGS [Menu] DT750 user can backup personal settings of DT750 to FTP/TFTP server. To back up the setting data , the DT History Directory Tool 750 needs to be connected to the network that has FTP Call Func.
  • Page 64 When 1 FTP is selected here, go to the [Backup/Restore] next Step (STEP 7). 1 Data Backup Data Restore When 2 TFTP is selected here, go to the Server Address next STEP 15. Protocol FTP Settings 5 FTP Settings and then press STEP 7: Select or OK soft key.
  • Page 65 (or press 2 key.) [FTP Settings] [FTP Settings] User ID Password 1 User ID Folder Password Folder ↓ Back ↓ Back STEP 9: Enter a User ID by using digit keys, then press or OK soft key. STEP 11:Enter a password by using digit keys, then (Enter) press or OK soft key.
  • Page 66 or OK soft key. STEP 14:The display goes back to the FTP Settings (Enter) (Right-cursor) (or press 3 key.) screen. Press or Back soft (Left-cursor) key to display the Backup/Restore screen. [FTP Settings] [FTP Settings] 1 User ID User ID Password Password Folder...
  • Page 67 TFTP server. For example, to set the IP ad- [Data Backup] dress of 10.41.208.205, enter 10*41*208*205 [separate with an asterisk (*)]. Input a folder name. [Server Address] ‘*‘For‘.‘ PersonalData.tgz Exec Cancel Note: Do not change the extension of the backup file. The setting data of the telephone can only be Back backed up as a .tgz file.
  • Page 68 The power to FTP/TFTP Note: Be sure not to turn OFF the DT750 while "Sav- server or network Turn on the power. ing..." is displayed on the LCD. equipment is OFF. Reconnect the cable LAN cable is disconnected. STEP 19:After the data backup is complete, the display securely.
  • Page 69 • TO RESTORE PERSONAL SETTINGS key.) [Menu] DT750 user can restore the personal settings of DT750. To download the backup file to the telephone, the DT750 needs to be connected to the network that has FTP (TFTP server). History Directory Tool Call Func.
  • Page 70 When 1 FTP is selected here, go to the [Backup/Restore] next Step (STEP 7). 1 Data Backup Data Restore When 2 TFTP is selected here, go to the Server Address next STEP 15. Protocol FTP Settings 5 FTP Settings and then press STEP 7: Select or OK soft key.
  • Page 71 (or press 2 key.) [FTP Settings] [FTP Settings] User ID Password 1 User ID Folder Password Folder ↓ Back ↓ Back STEP 9: Enter a User ID by using digit keys, then press or OK soft key. STEP 11:Enter a password by using digit keys, then (Enter) press or OK soft key.
  • Page 72 or OK soft key. STEP 14:The display goes back to the FTP Settings (Enter) (Right-cursor) (or press 3 key.) screen. Press or Back soft (Left-cursor) key to display the Backup/Restore screen. [FTP Settings] [FTP Settings] 1 User ID User ID Password Password Folder...
  • Page 73 which stores the backup file. For example, to [Data Restore] set the IP address of 10.41.208.205, enter 10*41*208*205 [separate with an asterisk Input a folder name. (*)]. [Server Address] ‘*‘For‘.‘ PersonalData.tgz Exec Cancel Note: Do not change the extension of the backup file. The setting data of the telephone can only be backed up as a .tgz file.
  • Page 74 Incorrect IP address of Note: Be sure not to turn OFF the DT750 while "Sav- FTP/TFTP server has been Set the proper IP address ing..." is displayed on the LCD. entered from the of FTP/TFTP server. telephone. STEP 19:After the downloading process is complete, The power to FTP/TFTP the display changes as follows: server or network...

  • Page 75: Basic Operation

    ASIC PERATION This chapter describes the following basic operation of DT750. • TO LOGIN • TO LOGOUT • TO MAKE AN EXTERNAL CALL • TO MAKE AN INTERNAL CALL • TO ANSWER AN EXTERNAL CALL • TO ANSWER AN INTERNAL CALL •...

  • Page 76: To Login

    TO LOGIN When login mode is activated, the telephone 1:25 PM MON 24 AUG 2009 >>> prompts for Login ID and Password. Information Area of LCD Login ID : Press the pre-assigned Logout soft key on the Password : terminal. Cancel 1:25 PM MON 24 AUG 2009 Enter Login ID and press Set soft key.

  • Page 77: To Make An External Call

    TO MAKE AN EXTERNAL CALL Display indicates: Lift the handset or press Speaker key, receive dial Elapsed Time tone. 15:20 9XXXXXXXXX Line Key which accommodates My Line of the telephone 31313 Note: My Line is an actual line that is directly associated with station number of the telephone.

  • Page 78: To Make An Internal Call

    TO MAKE AN INTERNAL CALL Note: My Line is an actual line that is directly associated with station number of the telephone. The user can make/answer a call via this line. Usually, My line is seized automatically only by lifting the handset or pressing the Speaker key Lift handset or press key, receive dial tone.

  • Page 79: To Answer An External Call

    TO ANSWER AN EXTERNAL CALL Trunk Trunk Elapsed Number Type Time Answer You hear the ringing tone, and key and Call 15:39 Indicator Lamp flash red. 1:25 PM MON 24 AUG 2009 Line Key receiving an Incoming Call 31315 Note: When an incoming call is terminated to My Line of the telephone, the user can usually answer the call only by lifting the handset or pressing the...

  • Page 80: To Answer An Internal Call

    TO ANSWER AN INTERNAL CALL Note: When an incoming call is terminated to My Line of the telephone, the user can usually answer the The following procedure expalins how to answer an call only by lifting the handset or pressing the internal call routed to My Line of the telephone.

  • Page 81: Multiline Appearance

    MULTILINE APPEARANCE Status icon changes as follows: This feature allows users to accommodate the lines (other telephone’s station number) other than My Line 31315 on the Programmable Line/Feature Keys. When accommodating other telephone’s station number on the Programmable Line/Feature Key, the user can Lift handset to start a conversation.

  • Page 82: To Hold A Call

    TO HOLD A CALL Lift the handset and then touch the held Line Key on the display. Status icon changes as follows: While engaged in a Two-party call: 31313 Line Key which is being used 31313 Note: Any station with this line appearance can retrieve the call.

  • Page 83: To Place A Call On Exclusive Hold

    TO PLACE A CALL ON EXCLUSIVE Touch the held Line Key on the display. The con- versation is re-established. HOLD Status icon changes as follows: This feature allows a user to place a call on hold and to exclude all other users from retrieving the Held Call. 31313 While engaged in a Two-party call: Note:...

  • Page 84: To Transfer A Call

    TO TRANSFER A CALL During a conversation, press Transfer key. Receive Special Dial Tone. The first party is placed on hold and hears the music on hold. TRANSFER 1:25 PM MON 24 AUG 2009 Dial the destination party’s number. Receive Ring- back Tone.

  • Page 85: To Make A Call Using One-Touch Speed Calling Keys

    92142626000 TO MAKE A CALL USING ONE- 1:25 PM MON 24 AUG 20098 TOUCH SPEED CALLING KEYS Touch the desired One-Touch Speed Calling key on the display. Feature Press key again to save the number. Feature key lamp goes off. *2626000 1:25 PM MON 24 AUG 2009...

  • Page 86: To Make A Call Using Speed Calling -Station/Group

    TO MAKE A CALL USING SPEED TO OPERATE FROM SPEED CALLING -STATION/GROUP CALLING SYSTEM KEY Press the “Speed Calling – System” key DOWN XXXX Scroll to the desired speed calling number. 1:25 PM MON 24 AUG 2009 XXXXXX If the DT750 does not have “Speed Calling – system key, dial the Speed Calling System access code, key to dial the number.
  • Page 87 THREE/FOUR-PARTY CONFERENCE While Station A and Station B are engaged in a Two-party connection, Station A presses Transfer key. Station A hears Special Dial Tone. Station B hears the music on hold. TRANSFER MON 24 AUG 2009 1:25 PM Station A dials a desired Station Number (Station TRANSFER XXXX 1:25 PM MON 24 AUG 2009...

  • Page 88: Security Mode

    SECURITY MODE DT750 has the Security key which prevents information leakage from terminal. While the telephone is locked, Security Lamp lights up. Security Lock? Security Lamp lights up. Cancel OK Press Security Key. Press or OK soft key to place DT750 in (Enter) Security mode.
  • Page 89 Enter the password and then press (Enter) OK soft key. Security Lamp is extinguished and Security Mode is canceled. Note: When the password entry ends in failure, the following error message is displayed. Press OK soft-key and retry entering the password. Password Error.

  • Page 90: Dial By Name

    DAIL BY NAME STEP 2: Enter name There are two types of Dial By Name features: System and Station. [System Speed Dialing] System NAME: (ABC) Prev Next System Dial By Name is used on a system basis. The data entry is made by the Telephony Server Administrator.
  • Page 91 • STATION DIAL BY NAME STEP 2: Station Speed Dial screen appears Press To Add New Data ENTERY key [Station Speed Dialing] Example: NAME: DT750 Station A registers “John Smith” as new name (ABC) ENTERY Prev Next and his Telephone Number. STEP 3: Go to next empty Speed Dial location .
  • Page 92 STEP 6: Name and number are registered. [Station Speed Dialing] JOHN SMITH 1234 (ABC) ENTERY Prev Next Note: When entering an outside number you must include the Trunk access Code (i.e., 9) followed by area code and number. For a name the first 7 characters plus * for name slonger than 8 characters and the * plus last 7digits of a number longer than 8 digits.
  • Page 93 Available Characters In Station Speed Dial The following tables show available characters in Local Phonebook. UPPERCASE CHARACTER Digit ∗ Code ∗ À È Ì Ñ Ù β Á É Í Ò Ú Â Ê Î Ó Û Ã Ë Ï Ô...
  • Page 94 LOWERCASE CHARACTER Digit ∗ Code ∗ à è ì ñ ù β á é í ò ú â ê î ó û ä ë ï ô ü “ å õ æ ö ç SP: Space...

  • Page 95: Call History

    CALL HISTORY There are two types of Call History features. On the one hand, the history data is stored in the system memory. On the other hand, the history data is stored in the memory of the telephone (see 5.CALL HISTORY OPERATION).
  • Page 96 - OR - Entry Press soft key [Incoming Calls] Press soft key to view Outgoing Calls 8/24 9:37 912142626000 [25000] <<<< Entry DelAll 4:26 PM MON 24 AUG 2009 Number is added to Speed Dial Location 05 [Incoming Calls] Press t soft key to view additional Outgoing Redial calls.
  • Page 97 Press soft key to delete the displayed DelAll number . Press soft key to delete all Incoming Call Entries. [Incoming Calls] 8/24 9:37 912142626000 <<<< Entry DelAll...

  • Page 98: Menu List

    MENU LIST FOR DT750 USED WITH UNIVERGE SV8300 Menu Item Description Menu Press Menu key while indicating the current time on LCD. To view call history data. Also, the user can add the history data to the History directory. Directory Access to System Speed Dial Used when accessing external XML server.
  • Page 99 Directory Menu List For Menu Item Description Default Value 1 History Displays the history of outgoing calls. Outgoing Displays the history of incoming calls. Incoming...
  • Page 100 Tool Menu List For Menu Item Description Default Value 3 Tool 1 Service Activate XML browser. 2 IM Not used.
  • Page 101 Setting Menu List For Menu Item Description Default Value 5 Setting 1 User Setting Make the user setting of DT750. 1 Incoming Call Settings for incoming call. 1 Ring Volume Not used. 2 Offhook Ring Enable/disable Off-hook ringing. Enable 3 Headset Ring Enable/disable the ringing of headset.
  • Page 102 Menu Item Description Default Value Not used. 3 Screen Server Screen Saver Mode Chose enable or disable Screen Saver Enabled Wait Time Wait time before Screen Saver starts 1 minute 4 Back Light Set the brightness of the backlight. Level 2 Change the displayed character size on the LCD.
  • Page 103 Menu Item Description Default Value 3 Data Backup/Restore Set the data required for the file backup/restore. 1 Data Backup Specify the file name to be backed up. PersonalData.gz 2 Data Restore Specify the file name to be restored. PersonalData.gz 3 Server Address Enter an IP address of the FTP/TFTP server.

Table of Contents