Grizzly G0604 Owner's Manual page 43

To set the 90˚ fence stop:
1.
Loosen the set screw in the plunger lock
collar, shown in Figure 63, and loosen the
fence tilt lock.
2.
Using a 90° square, adjust the fence to the
90° position, as shown in Figure 63.
Figure 63. Adjusting fence to 90˚.
G0604 6" X 56" Jointer
To set the 45° outward fence stop:
1. Loosen the fence tilt lock, and position the
fence against the 45° outward positive stop
bolt.
2. Loosen the jam nut on the 45˚ outward fence
positive stop bolt (Figure 64).
Figure 64. Adjusting fence 45˚ outward.
3.
Adjust the 45˚ outward positive stop bolt until
the fence is exactly 45° outward while rest-
ing on the bolt (check the angle with a sliding
bevel set to 135°).
4. Retighten the jam nut loosened in Step 2.
-41-