Configuration
1. Ensure firmware is at least 5.1.10.
2. Connect your PC to the Linksys SPA2102 on the Ethernet port.
3. Set your PC to get an IP address from the DHCP server(If DHCP is turned off on the Linksys,
use 192.168.0.5 and subnet 255.255.255.0)
4. Open the Internet Explorer and type http://192.168.0.1 and Enter.
5. Now you can see the Linksys configuration.
6. Click Admin Login and select Advanced.
7. On the Router setup select WAN setup and select the connection type. (If DHCP is not
available type the IP address manually) type the DNS address Pri ‐ 83.137.182.72 and Sec ‐
83.137.182.73 and click submit all changes.
8. On the Voice setup select Line 1 and change the following settings
8.1. Under Network Settings
Network Jitter Level: very high
Jitter Buffer Adjustment: disable
8.2. Under Proxy and Registration
Proxy: as.vanillaip.com
Outbound Proxy: 83.137.182.120
Use Outbound Proxy: yes
Register: yes
Register Expires: 60
8.3. Under Subscriber Information
Display Name: Line Port without domain name
User ID: Line Port without domain name
Password: type user password
Use Auth ID: yes
Regency 5000 ‐ Linksys SPA2101 Phone Adapter Configuration Guide.Docx
2
V1.00.0001