Multicast > Bridge Multicast Forward All - Linksys SLM2048 (EU) User Manual

Chapter 4
Brdge Multcast Address
MAC address/IP address.
Brdge IP Multcast
Displays the port that can be added
to a Multicast service.
Interface, Ggabt, LAG Lists switch interfaces and LAGs
that can be added to a Multicast service. The configuration
options are as follows:
Statc
Indicates the port is user-defined.
•
Dynamc
Indicates the
•
dynamically.
Forbdden Forbidden ports are not included the
•
Multicast group, even if IGMP snooping designated
the port to join a Multicast group.
None
The port is not configured for Multicast service.
•
Click Add to Lst to add the configured static multicast
address to the table at the bottom of the screen.
Click Show All to display all multicast addresses on all
VLANs in the table at the bottom of the screen.
Click Save Settngs to save the changes, or Cancel
Changes to cancel the changes.
Multicast > Bridge Multicast Forward All
The Bridge Multicast Forward All screen contains fields for
attaching ports or LAGs to a device that is attached to a
neighboring Multicast router or switch.
Multicast > Bridge Multicast Forward All
Once IGMP Snooping is enabled, Multicast packets are
forwarded to the appropriate port or VLAN.
The Bridge Multicast Forward All screen contains the
following fields:
VLAN ID
Displays the VLAN for which Multicast
parameters are displayed.
Busness Seres Smart Ggabt Ethernet Swtch
Identifies the Multicast group
port is configured
Configuration Using the Web-based Utility
Interface
Interfaces with the following configuration
options:
Statc
The port is user-defined.
•
Dynamc
The port is configured dynamically.
•
None
The port is not configured for Multicast service.
•
Ggabt
Gigabit ports with the following configuration
options:
Statc The Gigabit port is user-defined.
•
Dynamc The Gigabit port is configured dynamically.
•
None The Gigabit port is not configured for Multicast
•
service.
LAG
LAGs with the following configuration options:
Statc
The LAG is user-defined.
•
Dynamc
The LAG is configured dynamically.
•
None
The LAG is not configured for Multicast service.
•
Click Save Settngs to save the changes, or Cancel
Changes to cancel the changes.
0