Motorola DCT6200 Setup Manual page 7

Connecting the DCT6200/DCT6208 to a High-Definition TV – Audio Only
TO
TV/VCR
DVI IN
Cable/
Antenna IN
This diagram shows the primary
audio connection from your
DCT6200/DCT6208 to your HDTV.
You should use this configuration only
if your HDTV has built-in speakers and
you do not intend to include a stereo
or Home Theater receiver in your
configuration.
IR
CABLE
USB
IN
Video 1 Video 2
R
S-Video
L
Video
R R
Audio
L L
Connector cables to be used: Two-pronged RCA type audio cable (red & white)
1. Locate the AUDIO OUT L (white) & R (red) outputs on the cable box and the AUDIO IN L & R inputs on your HDTV.
2. Using a two-pronged RCA type audio connector, connect the L (white) output on the cable box to the L (white) input
on your HDTV. Do the same for the red.
If your HDTV offers digital audio inputs you may use the SPDIF or Optical SPDIF outputs on the cable box to connect
the audio.
DCT5100/DCT6200/DCT6208
VIDEO
AUDIO IN
R L SPDIF IN OUT
S-VIDEO
TV
Pass Card
R L Y Pb Pr
AUDIO
OUT
HDTV
Video 3
Y
Pb
Pr
R
L
IEEE 1394
SWITCHED
105/125V
60Hz
4A MAX
CONVENIENCE
500W MAX
OPTICAL
OUTLET
SPDIF
Do not plug the DCT6200/DCT6208 power cord into a
wall outlet until you have completed all connections
between the DCT and other components.