1 INSTALL FRAMING
FOR HOOD SUPPORT
IMPORTANT: Framing must be capable
of supporting 100 lbs.
8" Min. Opening for Ductwork
Centerline of
Installation
Space
the studs. Use cleats behind both sides of the support
to secure the support to wall studs.
Installation Instructions
View From Rear
Cleats
1" x 6" Min.
Mounting
Support
. The
9
2 INSTALL MOUNTING BRACKETS
This vent hood must be secured to the horizontal support or
wall studs.
all mounting screw locations.
horizontal support.
Note:
remove these screws.
wood screws provided.
Screws
"B"
Screws
"A"