GE ABN08 Owner's Manual page 11

Install the
Air Conditioner
in the Window
Top
rail
Slide Out the
Filler Panels
Install the Window
Gasket and the
Locking Bracket
1 Center the air conditioner in the
window placing it on the support
bracket. Make sure the bottom
rail is behind the window stool.
2 Lower the window until it touches
behind the air conditioner
top rail.
1 Extend the filler panels on both
sides until they touch the window
tracks.
2 Secure the top and the bottom
with four 3/4" long screws.
1 Cut the foam top window gasket
to the window width.
2 Stuff the foam between the
glass and the window to prevent
air and insects from getting into
the room.
CAUTION:
• DO NOT release the grip on the air
conditioner until it fits tight
between the window and the stool.
• DO NOT drill a hole in the base pan.
The air conditioner is designed to
operate with water in the base pan.
INSTALLATION WITHOUT THE
FILLER PANELS
If filler is required on the sides
of the air conditioner, cut filler
sheet (not supplied) to size and fill
both sides.
3 Attach the window locking
bracket with a 3/4" screw.
11