GE ABN08 Owner's Manual page 10

Installation Instructions
Read completely then follow step-by-step
Install the
Filler Panels
Install the
Support Bracket
/ "
1
3
16
Level with sill
10
1 Insert the right and left hand
filler panels into the top and
bottom rails.
1 Screw the leveling bolt into the
support bracket.
2 Mark the centerline of the
window and place the support
/ " from the
bracket on it 1
3
16
window stool.
3 Attach the support bracket
onto the window sill with two
1" screws.
4 Peel the backing off the bottom
window gasket and place onto
the backside of the window stool.
Stool
2 Secure them with eight 3/8"
screws, four on each side.
5 Using the level, adjust the level-
ing bolt so the curved top of the
support bracket is 1⁄4" below the
top of the window stool.
NOTE:
This downward tilt towards the
outside prevents water from entering
the room.
1/4"
Support
bracket