Remove the interposer board.
7.
Remove the 12.7-mm optical drive from the optical drive carrier.
8.
To replace the component, reverse the removal procedure.
Optical drive (9.5 mm)
This procedure documents replacement of an optical drive in servers equipped with a four-bay hard drive
cage.
To remove the component:
CAUTION:
all bays are populated with either a component or a blank.
Power down the server (on page 27).
1.
Remove the server from the rack (on page 28).
2.
To prevent improper cooling and thermal damage, do not operate the server unless
Removal and replacement procedures 35