Monitoring The Nonstop Tcp/Ip Subsystem - HP NonStop NS-series Operation Manual

Communications Subsystems: Monitoring and
Recovery
Monitoring CLIPs
To display the current status for a CLIP:
> SCF STATUS SERVER $ZZWAN.#concentrator-name.clip-num
Values for the CLIP number are 1, 2, or 3.
The system displays a listing similar to:
-> status server $zzwan.#s01.1
WAN Manager STATUS SERVER for CLIP \COWBOY.$ZZWAN.#S01.1
STATE :..........STARTED
PATH A...........: CONFIUGRED
PATH B...........: CONFIGURED
NUMBER of lines. 2
Line...............0
Line...............1

Monitoring the NonStop TCP/IP Subsystem

This subsection describes how to obtain the status for NonStop TCP/IP processes,
routes, and subnets. For additional information, refer to the TCP/IP Configuration and
Management Manual. For NonStop TCP/IPv6, refer to the TCP/IPv6 Configuration and
Management Manual.
Monitoring the NonStop TCP/IP Process
To display the dynamic state of a NonStop TCP/IP process, first list the names of all
NonStop TCP/IP processes:
-> SCF LISTDEV TCPIP
Then type:
> SCF STATUS PROCESS tcp/ip-process-name
where tcp/ip-process-name is the name of the process you want information
about.
The system displays a listing similar to this output, which is for process $ZTCO:
-> Status Process $ZTCO
TCPIP Status PROCESS \SYSA.$ZTCO
Status: STARTED
PPID.................( 0,107)
Proto State
TCP TIME-WAIT
TCP TIME-WAIT
TCP ESTAB
TCP TIME-WAIT
HP Integrity NonStop NS-Series Operations Guide —529869-005
: $SAT23A
: $SAT23B
Laddr Lport
130.252.12.3 ftp-data
130.252.12.3 ftp-data
130.252.12.3 ftp
130.252.12.3 smtp
6 -9
Monitoring the NonStop TCP/IP Subsystem
BPID.............. ( 1. 98)
Faddr
130.252.12.152 11089
130.252.12.152 63105
130.252.12.152 57441
130.252.12.8
Fport SendQ RecvQ
0 0
0 0
0 0
3309 0 0