Additional Subsystems Controlled By Scf; Table 2-6. Displaying Information For The Wan Subsystem ($Zzwan); Table 2-7. Subsystem Objects Controlled By Scf - HP NonStop NS-series Operation Manual

Determining Your System Configuration
Examples of the INFO command used with the OBEYFORM option are:
-> INFO ADAPTER $*, OBEYFORM
-> INFO LIF $*, OBEYFORM
WAN Subsystem
Before using commands listed in
network (WAN) subsystem the default object:
> SCF ASSUME PROCESS $ZZWAN
The WAN subsystem has responsibility for all WAN connections.

Table 2-6. Displaying Information for the WAN Subsystem ($ZZWAN)

To Display Information About These
Configured Objects
The WAN subsystem manager
All WAN configuration managers, TCP/IP
processes, and WANBoot processes
All PATH names
The WAN adapters
All DEVICE objects
All PROFILE objects

Additional Subsystems Controlled by SCF

Table 2-7 lists the names associated with additional subsystems that can be controlled
by SCF, along with its device types. You can use SCF commands to display the
current attribute values for these objects.
Some SCF commands are available only to some subsystems. The objects that each
command affects and the attributes of those objects are subsystem specific. This
subsystem-specific information is presented in a separate manual for each subsystem.
A partial list of these manuals appears in
Refer to the SCF Reference Manual for H-Series RVUs for further information.
Table 2-7. Subsystem Objects Controlled by SCF (page 1 of 2)
Subsystem
Acronym
AM3270
ATM
ATP6100
HP Integrity NonStop NS-Series Operations Guide —529869-005
Table
Description
AM3270 Access Method
Asynchronous Transfer Mode (ATM)
protocol
Asynchronous Terminal Process 6100
2- 13
Additional Subsystems Controlled by SCF
2-6, type this command to make the wide area
Enter This Command
LISTDEV WAN
INFO *
INFO PATH *
INFO ADAPTER *
INFO DEVICE *
INFO PROFILE *
Table 6-1 on page 6-13.
Device Device
Type Subtype
60 0 or 10
42 0 or 1
53 0