Pathmon States - HP NonStop NS-series Operation Manual

Applications: Monitoring and Recovery
PATHCOM responds with output such as:
EXTERNALTCPS
LINKMONS
PATHCOMS
SPI
SERVERCLASSES
SERVERPROCESSES
TCPS
TERMS
This output provides information about the number of Pathway processes and
servers that are running, stopped, and so forth.
4. To check the state of the PATHMON process within the Pathway environment and
its status for your application:
= STATUS PATHMON
PATHCOM responds with output such as:
PATHMON -- STATE=RUNNING
PATHCTL (OPEN)
LOG1 SE (OPEN)
LOG2 (CLOSED)
REQNUM FILE
1 PATHCOM
2 TCP

PATHMON States

The status of the PATHMON process can be either STARTING or RUNNING:
STARTING indicates that a system load or cool start has not finished.
RUNNING indicates that a system load or cool start has finished.
The other elements of the STATUS PATHMON output are:
CPUS shows the number of the primary and backup processors in which the
PATHMON process is running. If the backup PATHMON process is not running,
the second number is blank.
PATHCTL, LOG1, and LOG2 contain information about the PATHMON control file
and the logging files.
The REQNUM column contains the PATHMON internal identifiers of application
requesters that are currently running in this environment.
The FILE column identifies the type of requester.
HP Integrity NonStop NS-Series Operations Guide —529869-005
RUNNING
0
0
1
1
RUNNING STOPPED THAWED
13 5
RUNNING STOPPED PENDING
13 40
1 0
RUNNING STOPPED PENDING
1 0
CPUS 6:1
$GROG.VIEWPT.PATHCTL
$0
PID PAID
$Y622 8,001
$Y898
FREEZE
FROZEN PENDING
18 0
0
0
SUSPENDED
0 0
WAIT
13- 5
PATHMON States
0