Web-Based Configuration - D-Link DAP-1520 User Manual

Section 3 - Configuration
To access the configuration utility for the DAP-1520 on your PC,
first connect to the DAP-1520 wirelessly using the Wi-Fi name
(SSID) and password located on your Wi-Fi Configuration Card.
Then open a web browser and enter http://dlinkap.local./ in
your browser's URL field. You may also enter the IP address* of
the DAP-1520. Windows XP users can enter http://dlinkap.
* The default IP address is 192.168.0.50. Once your DAP-1520 connects to
your router, it will be assigned a new IP address based on your network's
DHCP settings. You will need to log in to your router to see what IP address
was assigned to your DAP-1520.
For multiple DAP-1520s, go to http://dlinkapxxxx.local. as shown on the
included Wi-Fi Configuration Card, with "xxxx" being the last four digits of
the DAP-1520's MAC address.
Enter your password. By default, Admin is selected as the username
and cannot be changed, and by default, the password is blank.
The configuration interface will open, and you can configure the
various settings for the DAP-1520. If you have not yet configured
an uplink network, the home screen will show that there is no
connection between the DAP-1520 and the uplink router.
For detailed information on manually setting up your DAP-1520
to extend an existing wireless network, refer to "Using the Manual
Method" on page 21.
D-Link DAP-1520 User Manual

Web-based Configuration

15