Network Configuration Menu - Cisco 7975G Software Manual

Administration guide for cisco unified communications manager 7.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-1
Settings Configurable from the Phone (continued)
Category
Description
TFTP settings
If you do not use DHCP to direct the phone to a TFTP server, you must
manually assign a TFTP server. You can also assign an alternative
TFTP server to use instead of the one assigned by DHCP.
Related Topics

Network Configuration Menu

The Network Configuration menu provides options for viewing and making a variety of network
settings.
them.
For information about how to access the Network Configuration menu, see the
Configuration Menu" section on page
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
Note
information about the options on that menu, see the
Before you can change an option on this menu, you must unlock options as described in the
and Locking Options" section on page
configuration options appear only if options are unlocked.
For information about the keys you can use to edit options, see the
Table 4-2
Network Configuration Menu Options
Option
Description
IPv4 Configuration In the IPv4 Configuration menu, you can do the following:
For more information on the IPv4 address fields, refer to
IPv4 Configuration Menu
IPv6 Configuration This menu setting is disabled in this release.
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Network Configuration Menu, page 4-5
Device Configuration Menu, page 4-11
Table 4-2
and
Table 4-3
Enable or disable the phone to use the address that is assign by
the DHCP server.
Manually set the IP Address, Subnet Mask, Default Routers,
DNS Server, and Alternate TFTP servers.
Options.
describe these options and, where applicable, explains how to change
4-2.
"Network Configuration" section on page
4-3. The Edit, Yes, or No softkeys for changing network
Table 4-3
Network Configuration Menu
Network Configuration Menu
Option
TFTP Server 1
Alternate TFTP
TFTP Server 2
"Displaying a
"Unlocking
"Editing Values" section on page
To Change
1.
Unlock network
configuration options.
Scroll to IPv4 Configuration
2.
and press the Select softkey.
4-27.
4-3.
4-5

Advertisement

Table of Contents
loading

Table of Contents