Overview Of Site Planning Steps; Chapter 2 Power And Cooling - Cisco 6000 Series Site Planning Manual

Chapter 1 Cisco NCS 6008 Chassis

Overview of Site Planning Steps

Table 1-2
the table as a checklist for all aspects of the installation. For information about a particular task, see the
appropriate section of this site planning guide. After completing the checklist, you should consult your
Cisco installation coordinator for a site-readiness inspection.
Table 1-2 Site Planning Checklist
Site Planning Steps
Consider equipment arrival, storage, and
1.
transport to the installation site.
Consider the space where the routing system
2.
will be installed.
Plan for power (AC or DC).
3.
4. Consider cooling and airflow requirements.
Consider cable management.
5.
Consider Cisco installation services.
6.
OL-29236-02
lists the sequence of tasks to perform as you plan the installation of the routing system. Use
See
"Basic Site and Installation Planning" section on page 4-1
"Aisle Spacing and Maintenance Access Floor Plan" section on
page 4-3
Chapter 2, "Power and Cooling"
"Power Specifications" section on page 3-2
"Chassis Cooling System" section on page 2-16
"Facility Cooling Requirements" section on page 2-17
"" section on page 3-5
"Cable Management" section on page 4-4
"Cisco Installation Services" section on page 4-6
Cisco Network Convergence System 6000 Series Routers Site Planning Guide
Overview of Site Planning Steps
Check
1-7