To Arm The System In Instant Mode And Stay Inside - Honeywell OMNI-408 User Manual

System Operation (cont'd)

To Arm the System In Instant Mode and Stay Inside

In INSTANT STAY mode, the perimeter portion of your burglar
alarm system is armed, but the time delays are eliminated from your
normal entry/exit door(s). All interior protection is disarmed, so you
are free to move around inside.
Check to make sure the system is READY. When it is ready, press:
INSTANT
STAY
When the system has been armed successfully, the ARMED LED is
on, and the following is displayed:
LCD Keypad:
ON: STAY / INS
NOTE: This system can be programmed by the installer for the
AUTOSTAY feature which automatically bypasses interior zones if
you arm the system in AWAY mode, but do not exit through a delay
zone during exit time.
– 12 –
followed by
followed by your User Code.
Fixed-Word Keypad:
STAY
INSTANT