Table of Contents
Advertisement
24
en | Installation
5.3
Connections
CAUTION!
Isolate unused power wires individually.
Check the type label on the rear of the camera module for the
correct power ratings.
5.3.1
Make the connections
The unit has connection terminals on flying leads. In wet or
outdoor installations make use of a field wiring box with
NEMA Type 4X or IP66 protection level or better. Make the
connections inside a water tight compartment. Isolate unused
power wires individually. After connections are made ensure
that the watertight compartment is tightly closed and cables
and conduits are properly sealed to prevent ingress of water.
Cable tree
Use the following table to identify the wires in the cable tree:
Wire color
Red
Brown
Yellow / Green
Black / Orange
White / Orange
White / Violet
Orange / Violet
Violet
White
(Shield)
Black
(Shield)
For connections use wires of at least the same thickness.
AM18-Q0615 | v1.0 | 2012.10
AWG
Signal
26
+12 VDC / 24 VAC
26
-12 VDC / 24 VAC
24
Earth
28
Alarm Out A
28
Alarm Out B
28
Ground (Alarm In + Data)
28
Alarm In 1
28
Alarm In 2
28
Audio In
28
Ground (Audio In)
28
Audio Out
28
Ground (Audio Out)
Installation Manual
FLEXIDOME HD
Bosch Security Systems
Advertisement
Table of Contents
